Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

The Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit features four powerful new diagnostic functions through the Fluke Connect Measurements app.

(1 customer review)
SKU: 2931

Call for Price

We are not Supporting COD Payments Terms Outside UAE

13 People watching this product now!

Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

The Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit is an essential toolset for professionals tasked with diagnosing and maintaining motors and drives. This comprehensive kit includes the Fluke 1587 FC 2-in-1 Insulation Digital Multimeter (DMM), the Fluke i400 Current Clamp, and the Fluke 9040 Phase Rotation Indicator. Together, these tools provide a robust solution for a wide range of electrical testing and troubleshooting tasks.

To find the best Fluke multimeter, visit the MME-AE website. The MME-AE website offers detailed information and pricing for various Fluke multimeters.

Components of the Kit

The Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit is a comprehensive solution for professionals in the electrical maintenance and troubleshooting industry. With its combination of insulation testing, current measurement, and phase rotation indication, this kit provides all the tools necessary for efficient and safe diagnostics of motors and drives.

Fluke 1587 FC 2-in-1 Insulation DMM

The Fluke 1587 FC Insulation DMM combines a full-featured digital multimeter with a powerful insulation tester, providing a versatile tool for motor and drive maintenance.

  • Insulation Testing: Perform tests at voltages of 50 V, 100 V, 250 V, 500 V, and 1000 V, measuring insulation resistance from 0.01 MΩ to 2.0 GΩ and 0.1 MΩ to 600 MΩ.
  • Pl/DAR Measurements: Identify moisture and contamination issues with timed ratio tests and TrendIt™ graphs.
  • Memory Storage: Store results through the Fluke Connect Measurements app, eliminating manual recording and reducing errors.
  • Temperature Compensation: Establish accurate baselines with temperature-compensated readings.
  • VFD Low-Pass Filter: Ensure accurate motor drive measurements.
  • Comprehensive Measurements: Includes frequency, capacitance, diode test, temperature, Min/Max, AC/DC voltage, DC millivolts, AC/DC milliamps, resistance (0.1 Ω to 50 MΩ), and continuity.
  • Safety and Convenience: Features auto power off, auto-discharge of capacitive voltage, and comes with a three-year warranty, remote probe, test leads, alligator clips, K-type thermocouple, and a hard case.

Fluke i400 AC Current Clamp

The Fluke i400 AC Current Clamp allows you to measure AC current safely and accurately without breaking the circuit.

  • Current Measurement: Measures from 1A AC to 400 A AC with a 1 mA/Amp output for easy reading.
  • Safety Ratings: Rated CAT III 1000 V and CAT IV 600 V for user protection.
  • Compact Design: Designed for maximum utility in a compact shape with a maximum conductor diameter of Ø 32 mm.

Fluke 9040 Phase Rotation Indicator

The Fluke 9040 Phase Rotation Indicator is essential for determining the phase rotation in three-phase systems, ensuring correct motor connection and operation.

  • Field Rotation and Phase Sequence: Easily determine field rotation and phase sequence with a large display.
  • Three-Phase Indication: Provides indication for all three phases.
  • Safety Rating: Rated CAT III 600 V for overvoltage protection.

Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit specifications:

DC and AC Current Measurement:

  • AC 45 Hz to 1000 Hz
  • Range:400 mA
  • Resolution:0.1 mA
  • Accuracy ±(% of Rdg+Counts):±(1.5% + 2)
  • Burden voltage (Typical):2 mV/mA
  • Range:60 mA
  • Resolution:0.01 mA
  • Accuracy ±(% of Rdg+Counts):±(1.5% + 2)
  • Burden voltage (Typical):2 mV/mA

DC:

  • Range:400 mA
  • Resolution:0.1 mA
  • Accuracy ±(% of Rdg+Counts):±(0.2% + 2)
  • Burden voltage (Typical):2 mV/mA
  • Range:60 mA
  • Accuracy ±(% of Rdg+Counts):±(0.2% + 2)
  • Burden voltage (Typical):2 mV/mA

Ohms Measurement:

  • Overload protection :1000 V rms or dc
  • Open circuit test voltage :<8.0 V dc
  • Short circuit current :Short circuit current

 

5
1 review
1
0
0
0
0

1 review for Fluke 1587/MDT FC Advanced Motor and Drive Troubleshooting Kit

Clear filters
  1. Daniel

    Bought this unit for work

    0
    0
Add a review

Brand

Fluke

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke logo brand

Data Sheet

Data Sheet

specifications

AC Voltage Measurement
Range Resolution Accuracy
600.0 mV 0.1 mV 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 5000 Hz ±(2% + 3)
6.000 V 0.001 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 5000 Hz ±(2% + 3)
60.00 V 0.01 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 5000 Hz ±(2% + 3)
600.0 V 0.1 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 5000 Hz ±(2% + 3)¹
1000 V 1 V 50 Hz to 60 Hz ±(2% + 3) 60 Hz to 5000 Hz ±(2% + 3)¹
¹ 1 kHz bandwidth
Low-Pass Filter Voltage
Range Resolution Accuracy
600.0 mV 0.1 mV 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 400 Hz ±(2% + 3)
6.000 V 0.001 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 400 Hz ±(2% + 3)
60.00 V 0.01 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 400 Hz ±(2% + 3)
600.0 V 0.1 V 50 Hz to 60 Hz ±(1% + 3) 60 Hz to 400 Hz ±(2% + 3)
1000 V 1 V 50 Hz to 60 Hz ±(2% + 3) 60 Hz to 400 Hz ±(2% + 3)
DC Voltage Measurement
Range Resolution Accuracy ±(% of Rdg + Counts)
6.000 V dc 0.001 V ±(0.09% + 2)
60.00 V dc 0.01 V ±(0.09% + 2)
600.0 V dc 0.1 V ±(0.09% + 2)
1000 V dc 1 V ±(0.09% + 2)
Input impedance: 10 MΩ (nominal), <100 pF
Normal mode rejection ratio: >60 dB @ 50 Hz or 60 Hz
Common mode rejection ratio: >120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance)
Accuracies apply to ± 100% of range
DC Millivolts Measurement
Range Resolution Accuracy ±(% of Rdg + Counts)
600.0 mVdc 0.1 mV ±(0.1% + 1)
DC and AC Current Measurement
Range Resolution Accuracy ±(% of Rdg+Counts)
400 mA (AC 45 Hz to 1000 Hz) 0.1 mA ±(1.5% + 2)¹
60 mA (AC 45 Hz to 1000 Hz) 0.01 mA ±(1.5% + 2)¹
400 mA (DC) 0.1 mA ±(0.2% + 2)
60 mA (DC) 0.01 mA ±(0.2% + 2)
¹ 1 kHz bandwidth
Burden voltage (Typical): 2 mV/mA
Overload: 600 mA for 2 minutes maximum
Fuse protection for mA input: 0.44 mA, 1000 V, IR 10 kA
AC conversion: Inputs are ac-coupled and calibrated to the rms value of sine wave input. Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3.
Ohms Measurement
Range Resolution Accuracy ±(% of Rdg + Counts)¹
600.0 Ω 0.1 Ω ±(0.9% + 2)
6.000 kΩ 0.001 kΩ ±(0.9% + 2)
60.00 kΩ 0.01 kΩ ±(0.9% + 2)
600.0 kΩ 0.1 KΩ ±(0.9% + 2)
6.000 MΩ 0.001 MΩ ±(0.9% + 2)
50.0 MΩ ² 0.01 MΩ ±(1.5% + 3)
Overload protection: 1000 V rms or dc
Open circuit test voltage: <8.0 V dc
Short circuit current: <1.1 mA
Diode Test
Diode Test Indication Accuracy ±(% of Rdg + Counts)
Display voltage drop: 0.6 V at 1.0 mA nominal test current ±(2% + 3)
Continuity Test
Continuity Indication Specifications
Continuous audible tone for test resistance below 25 Ω and off above 100 Ω Max Reading: 1000 Ω, Open circuit voltage: <8.0 V, Short circuit current: 1.0 mA typical, Overload protection: 1000 V rms, Response time: >1 m sec
Frequency Measurement
Range Resolution Accuracy ±(% of Rdg + Counts)
99.99 Hz 0.01 Hz ±(0.1% + 1)
999.9 Hz 0.1 Hz ±(0.1% + 1)
9.999 kHz 0.001 kHz ±(0.1% + 1)
99.99 kHz 0.01 kHz ±(0.1% + 1)
Frequency Counter Sensitivity: V ac Sensitivity (RMS Sine Wave)
600.0 mV: 5 Hz to 20 kHz – 100.0 mV, 20 kHz to 100 kHz – 150.0 mV
6.0 V: 5 Hz to 20 kHz – 1.0 V, 20 kHz to 100 kHz – 1.5 V
60.0 V: 5 Hz to 20 kHz – 10.0 V, 20 kHz to 100 kHz – 36.0 V
600.0 V: 5 Hz to 20 kHz – 100.0 V
1000.0 V: 5 Hz to 20 kHz – 300.0 V
Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy. Usable to 100 kHz with full scale input
Capacitance
Range Resolution Accuracy ±(% of Rdg + Counts)
1000 nF 1 nF ±(1.2% + 2)
10.00 μF 0.01 μF ±(1.2% + 2)
100.0 μF 0.1 μF ±(1.2% ±90 counts)
9999 μF 1 μF ±(1.2% ±90 counts)
Temperature Measurement
Range Resolution Accuracy ±(% of Rdg + Counts)
-40 °C to 537 °C 0.1 °C ±(1% + 10 counts)
-40 °F to 998 °F 0.1 °F ±(1% + 18 counts)
Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument
Insulation Specifications
Measurement Range 0.01 MΩ to 2 GΩ
Test Voltages 50, 100, 250, 500, 1000 V
Test Voltage Accuracy +20%, -0%
Short-Circuit Test Current 1 mA nominal
Auto Discharge Discharge time <0.5 second for C = 1 μF or less
Live Circuit Detection Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum Capacitive Load Operable with up to 1 μF load
General Specifications
Maximum Voltage Applied to Any Terminal and Common 1000 V
Storage Temperature -40 °C to 60 °C (-40 °F to 140 °F)
Operating Temperature -20 °C to 55 °C (-4 °F to 131 °F)
Temperature Coefficient 0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F)
Relative Humidity Noncondensing
0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F)
0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F)
0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F)
Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
Radio Frequency Communication 2.4 GHz ISM Band
Radio Frequency Certification FCC: T68-FBLE, IC: 6627A-FBLE
Electromagnetic Compatibility
International IEC 61326-1: Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected.
Korea (KCC) Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC) 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Enclosure Protection IEC 60529: IP40 (non-operating)
Safety
IEC 61010-1 Pollution Degree 2
IEC 61010-2-033 CAT IV 600 V / CAT III 1000 V
Batteries Four AA batteries (NEDA 15A or IEC LR6)
Battery Life Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Size (H x W x L) 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
Weight 550 g (1.2 lb)
Altitude Operating: 2000 m
Storage: 12,000 m
Over-Range Capability 110% of range except for capacitance which is 100%
Frequency Overload Protection <107 V Hz
Fuse Protection for mA Input 0.44A, 1000 V, IR 10 kA
Fluke i400 AC Current Clamp
Nominal Current Range 400 A
Continuous Current Range 1 A – 400 A
Maximum Non-Destructive Current 1000 A
Lowest Measurable Current 1 A
Basic Accuracy 2% + 0.06 A (45-400 Hz)
Usable Frequency 5 Hz – 20 kHz
Output Level(s) 1 mA/A
Safety Specifications
Safety CAT IV 600 V, CAT III, 1000 V
Maximum Voltage 1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical and General Specifications
Warranty 1 year
Maximum Conductor Diameter 32 mm (1.25 in)
Maximum Conductor Size (Busbar) 750 MCM
Output Cable Length 1.5 m (59 in)
Shrouded Banana Plugs Yes
Fluke 9040 Phase Rotation Indicator
Voltage Range 40-700 V
Frequency Range 15-400 Hz
Operating Timer Continuous
Environmental Specifications
Operating Temperature 0 °C to 40 °C
Dust/Water Resistance IP 40
Safety Specifications
Electrical Safety EN 61010, EN 61557“`html
-7
Overvoltage Category CAT III 600 V, CAT IV 300 V
Mechanical and General Specifications
Size 124 x 61 x 27 mm
Weight 200 g
Power Supply From unit under test