Fluke Calibration P3800 Series Hydraulic Deadweight Tester
The Fluke Calibration P3800 Series Hydraulic Deadweight Tester is the culmination of over 50 years of experience in the design and manufacture of primary pressure standards.
MME Shopping Event
Hurry and get discounts on Most of MME Products up to 20%
Call for Price
Fluke Calibration P3800 Series Hydraulic Deadweight Tester
The Pressurements P3800 Series High-Pressure Hydraulic Deadweight Testers are the culmination of over 50 years experience in the design and manufacture of primary pressure standards. With features and options designed to improve accuracy, increase reliability, and simplify operation, the P3800 Series can be used to calibrate virtually any high pressure sensing device including transducers, transmitters, gauges, pressure switches or other calibrators.
Three models are available, P3830, P3840 and P3860 offering pressure ranges of 30,000, 40,000 and 60,000 psi respectively (2000, 3000 and 4000 bar). All models are available in two accuracy classes, 0.02% or 0.015% of Reading. The Series P3800 offers an accurate and economical approach to calibrating high-pressure devices.
Fluke Calibration P3800 Series Hydraulic Deadweight Tester specifications:
- Pressure Ranges
- P3830 : 500 to 30,000 psi, or 40 to 2,000 bar, or 4 to
200 MPa, or 40 to 2000 kgf/cm2 - P3840 : 500 to 40,000 psi, or 40 to 2,600 bar, or 4 to
260 MPa, or 40 to 2600 kgf/cm2 - P3860 : 500 to 60,000 psi or 40 to 4,000 bar or 4 to
400 MPa or 40 to 4000 kgf/cm2 - Test port adapters : 9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP
- Instrument weight: 66 lbs. (30 Kg) Instrument Base only
- Instrument size : 18 x 13.5 x 19 in (455 x 340 x 478 mm)
- Reservoir volume: 235 cc (14.3 in3)
- Intensifier ratio : 7 to 1
- Seal materials: Nitrile
- Operating fluid: Dioctyl Sebacate (DOS), our reference 55-600
1 review for Fluke Calibration P3800 Series Hydraulic Deadweight Tester
Clear filtersYou must be logged in to post a review.
Jason –
Bought this unit for work