Description

The Fluke-805 FC Vibration Meter is engineered for precision monitoring of machinery vibrations across a broad frequency spectrum. With a 16‑bit A/D converter and an 80 dB signal‑to‑noise ratio, it delivers accurate readings from 10 Hz to 20 kHz. Its compact, IP54‑rated design and battery‑powered operation make it ideal for field inspections and preventive maintenance programs.

Fluke-805 FC Key Features

Low‑frequency range: 10 Hz to 1 000 Hz
High‑frequency range: 4 000 Hz to 20 000 Hz
Resolution: 0.01 g
Accuracy: ±5% at 100 Hz
Signal‑to‑noise ratio: 80 dB
Vibration limit: 50 g peak (100 g peak‑peak)
Battery life: 250 measurements on two AA Li‑Fe‑S batteries
USB 2.0 (full speed) for firmware updates and data export

Who Needs the Fluke-805 FC Vibration Meter?

Maintenance technicians, reliability engineers, and plant supervisors rely on the Fluke-805 FC to assess equipment health. Its dual‑frequency capability and Fluke Connect integration allow teams to compare vibration signatures, set severity thresholds, and document trends in real time. Buyers comparing models appreciate the meter’s robust build, clear display, and straightforward data export.

Fluke-805 FC Applications

The meter is suited for monitoring motors, pumps, gearboxes, and rotating equipment. It is also used in preventive maintenance schedules, condition‑based monitoring, and troubleshooting vibration‑related faults in industrial settings.

Why Buy Fluke-805 FC from MME?

MME offers the Fluke-805 FC with reliable delivery and dedicated technical support. The product is shipped in a secure, climate‑controlled package, ensuring it arrives ready for immediate deployment in your maintenance workflow.

Fluke-805 FC Specifications

Vibration Meter
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range (CF+ measurement)	4,000 Hz to 20,000 Hz
Severity levels	Good, satisfactory, unsatisfactory, unacceptable
Vibration limit	50 g peak (100 g peak-peak)
A/D converter	16-bit
Signal to noise ratio	80 dB
Sampling rate	Low frequency	20,000 Hz
	High frequency	80,000 Hz
Real time clock backup	Coin battery
Sensor
Sensitivity	100 mV g ±10%
Measurement range	0.01 g to 50 g
Low frequency range (overall measurement)	10 Hz to 1,000 Hz
High frequency range	4,000 Hz to 20,000 Hz
Resolution	0.01 g
Accuracy	At 100 Hz ±5% of measured value
Amplitude Units
Acceleration	g, m/sec²
Velocity	in/sec, mm/sec
Displacement	mils, mm
Infrared Thermometer (Temperature Measurement)
Range	-20°C to 200°C (-4°F to 392°F)
Accuracy	±2°C (4°F)
Focal length	Fixed, at ~3.8 cm (1.5 in)
External sensor
Fluke supports but does not provide external sensors
Frequency range	10 Hz to 1,000 Hz
Bias voltage (to supply power)	20 VDC to 22 VDC
Bias current (to supply power)	Maximum 5 mA
Firmware
External interfaces	USB 2.0 (full speed) communication
Data capacity	Database on internal flash memory
Upgrade	Through USB
Memory	Up to 3,500 measurements
Radiated Emission
Electrostatic discharge: burst	Standard EN 61000-4-2
Electromagnetic interference	Standard EN 61000-4-3
RE	Standard CISPR 11, Class A
Environmental
Operating temperature	-20°C to 50°C (-4°F to 122°F)
Storage temperature	-30°C to 80°C (-22°F to 176°F)
Operating humidity	10% to 95% RH (non-condensing)
Operating/storage altitude	Sea level to 3,048 meters (10,000 feet)
IP rating	IP54
Vibration limit	500 g peak
Drop test	1 meter
General Specifications
Battery type	AA (2) Lithium Iron Disulfide
Battery life	250 measurements
Size (L x W x H)	24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in)
Weight	0.40 kg (0.89 lb)
Connectors	USB mini-B 7-pin, stereo audio output jack (3.5 mm Audio Plug), external sensor jack (SMB connector)

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Fluke 805 FC Vibration Meter”

You must be logged in to post a review.

Fluke 805 FC Vibration Meter