MOHAMMAD MAHDI Electronics Trading LLC
Showing 1–24 of 150 resultsSorted by price: high to low
Gas Detector | Gas Analyzer
Our Gas Detector | Gas Analyzer brands
This category covers two related kinds of instrument. A gas detector warns people when a toxic gas, a combustible gas or low oxygen reaches a dangerous level, either clipped to a worker (portable) or mounted on a wall for 24/7 monitoring (fixed). A gas analyzer measures how much of each gas is present, for example O₂ and CO in boiler flue gas, so technicians can tune burners and document emissions. Safety officers, confined-space crews, oil & gas and wastewater plants, HVAC/R and boiler service teams across the UAE use both every day.
How to Pick a Gas Detector or Analyzer
First, list the gases you must see: H₂S and CO (toxic), LEL (combustible), O₂ depletion, CO₂, refrigerants or flue gases. Next, decide between a portable unit for people and a fixed transmitter for an area. For confined-space entry, a multi-gas detector with a built-in pump lets you sample the space before anyone goes in. Finally, plan for upkeep: sensors age, so budget for regular bump tests and calibration, and check each datasheet for the hazardous-area rating your site requires.
Want a closer look first? Read our Senko SGT-P single gas detector review and the Senko SP2nd replaceable-sensor detector review.
⚡ Quick Selection Guide
Residential boilers & burners: Testo 310 II flue gas analyser (O₂, CO up to 4,000 ppm, draught and temperature, Bluetooth reports via the testo Smart App).
Daily commercial heating service: Testo 300 Longlife Kit 2 with printer (TÜV-tested, long-life O₂ and H₂-compensated CO sensor up to 30,000 ppm, NO sensor retrofittable).
Industrial stacks: Testo 340 industrial flue gas analyser, one of our best-selling analysers.
Ammonia refrigeration leaks: Testo 316-4 Set 2 NH₃ leak detector (selective for ammonia, 6-LED concentration ring).
Confined-space entry: Senko SP MGTP multi-gas detector (up to 6 gases, built-in sampling pump, IP67).
Fixed area monitoring: Senko SI100 fixed gas detector (catalytic/IR LEL, electrochemical toxic or galvanic O₂ 0–30 %vol sensors).
MME (Mohammad Mahdi Electronics Trading LLC) supplies genuine Testo, Senko and other leading brands with manufacturer warranty, calibration certificates and dispatch across Dubai, Abu Dhabi, Sharjah and the GCC. Looking for indoor air quality instead? See our air & gas measurement range.
Authorized Gas Detector & Gas Analyzer Supplier in UAE
As a premier gas analyzer supplier in the UAE with centralized operations in Dubai, MME maintains ready stock of genuine instruments from world-leading manufacturers including Testo (Germany) and Senko (South Korea). We provide end-to-end local supply chain support—delivering factory-calibrated equipment, traceable verification certificates, official manufacturer warranties, and immediate dispatch across Dubai, Abu Dhabi, Sharjah, Saudi Arabia, and Oman.
Flue Gas & Combustion Analyzers
High-precision emission monitoring for boilers, furnaces, and turbine engines. Measures O₂, CO, CO₂, NO, NO₂, and flue gas temperature.
Featured: Testo 300, Testo 310 II, Testo 350
HVAC/R Refrigerant Leak Detectors
Rapid optical and acoustic leak location for chillers and cold rooms handling synthetic refrigerants, Ammonia (NH₃), and eco-friendly blends.
Featured: Testo 316-3, Testo 316-4, CEM Instruments
Fixed & Portable Gas Detection Dubai
Intrinsically safe personal detectors and continuous fixed transmitters for hazardous industrial gases (H₂S, LEL, CO, O₂ depletion).
Featured: Senko SI-100 Series, Senko MGT Multi-Gas
Technical Specifications & Comparison Matrix
Selecting the right instrument depends on your application — whether you need a compact analyzer for routine HVAC combustion checks or a rugged multi-gas detector for confined spaces and industrial plants. The comparison below summarises our most requested models by gas type, detection principle and typical use case, so your procurement team can shortlist the correct unit before requesting a quote.
| Model / Series | Primary Application | Target Gases | Compliance / Certification |
|---|---|---|---|
| Testo 310 II | HVAC & Residential Combustion Service | O₂, CO, CO₂ (calculated), Flue Temp | EN 50379-1, EN 50379-3 |
| Testo 300 Longlife | Commercial & Industrial Boiler Inspection | O₂, CO (up to 30,000 ppm), NO/NOx | TÜV-tested according to 1. BImSchV |
| Testo 316-4 | Industrial Chiller & Cold Storage Audit | CFC, HFC, HCFC, R290, R600a, NH₃ | EN 14624, SAE J1627 |
| Senko SI-100 Series | Fixed Continuous Plant Safety | Combustible (LEL), Toxic (H₂S, CO), O₂ | ATEX, IECEx, KCs Zone 1 / 2 |
Buy Gas Detectors & Gas Analyzers in UAE – Pricing & Procurement Guide
Looking to buy gas detectors or industrial flue gas analyzers in UAE? Pricing for professional measurement equipment depends on sensor configurations (standard O₂/CO cells versus long-life NOx/SO₂ sensors), intrinsically safe ATEX ratings, calibration grade, and bundled probe accessories.
Transparent B2B Pricing
Direct commercial tier discounts for MEP contractors, oil & gas facility managers, and regional trading partners with zero hidden surcharges.
Official UAE Quotations
Receive formal commercial quotes and proforma invoices with full datasheets and serial number traceability within 2 business hours.
Contact our Dubai technical sales team today for the updated 2026 gas analyzer price list, stock availability, or project tenders across the UAE, Oman, and Saudi Arabia.
Why Procure Gas Detection Instruments from MME UAE?
- Direct Regional Stock: Immediate dispatch across Dubai, Sharjah, and Abu Dhabi.
- Factory Calibration: Supplied with manufacturer test certificates and compliance reports.
- Engineering Consultation: Sensor replacement, span gas recalibration, and on-site support.
Frequently Asked Questions (UAE Gas Analysis & Detection)
Do these gas detectors and flue gas analyzers come with valid calibration certificates?
Yes. Portable and fixed gas detectors from manufacturers like Testo and Senko include factory calibration certificates traceable to international standards, fulfilling UAE Civil Defense and annual environmental audit requirements.
What is the typical delivery timeframe for industrial gas detectors in the UAE?
Standard in-stock units are generally dispatched within 24 to 48 hours across Dubai, Abu Dhabi, and Sharjah. Regional GCC delivery to Oman and Saudi Arabia typically takes between 2 to 4 working days subject to customs clearance.
What is the key difference between Testo 310 II and Testo 300 Longlife?
The Testo 310 II is designed for light commercial and residential HVAC boiler testing with standard O₂ and CO sensors (up to 4,000 ppm). The Testo 300 Longlife is built for heavy industrial stack compliance, offering long-life sensors, higher CO dilution (up to 30,000 ppm), and optional NO/NOx measurement modules.
Are these gas detectors certified for hazardous and explosive atmospheres?
Yes. Models intended for hazardous plant environments, such as the Senko SI-100 and personal multi-gas series, carry international ATEX and IECEx certifications for safe operation in Zone 1 and Zone 2 explosive environments.
Bench Multimeters