Description

The Fluke 52120A Transconductance Amplifier is a high-precision instrument designed for accurate current measurements in various applications.

With its wide input current range and high current gain, this amplifier is ideal for use in industrial, commercial, and research settings.

Fluke Key Features

The Fluke 52120A features a range of key specifications, including:

Output ranges: 2 A, 20 A, 120 A (100 A dc)
Input current range: 200 mA, 200 mA, 120 mA (100 mA dc)
Current gain: 10, 100, 1000
Input voltage range: 2 V, 2 V, 1.2 V (1.0 V dc)
Transconductance: 1, 10, 100 Siemens
Frequency: To 10 kHz
Maximum output compliance voltage: 4.5 Vrms (6.4 Vpeak)

Who Needs the Fluke 52120A?

The Fluke 52120A Transconductance Amplifier is designed for use by technicians, engineers, and researchers who require high-accuracy current measurements in a range of applications.

From industrial process control to research and development, this amplifier is ideal for use in any setting where precise current measurements are required.

Fluke Applications

Use in industrial process control systems to measure current levels and optimize system performance.
Use in research and development to measure current levels in experimental setups.
Use in commercial settings to measure current levels in power distribution systems.
Use in medical equipment to measure current levels in life-saving devices.
Use in aerospace and defense to measure current levels in critical systems.
Use in automotive to measure current levels in vehicle systems.
Use in power generation and distribution to measure current levels in power systems.

Why Buy the Fluke 52120A from MME?

The Fluke 52120A Transconductance Amplifier is a high-quality instrument designed for accurate current measurements.

At mme-ae, we offer a range of Mohammad Mahdi Electronics products, including the Fluke 52120A, which is designed to meet the needs of technicians, engineers, and researchers.

Fluke Specifications

Operating limits
Output ranges	2 A, 20 A, 120 A (100 A dc)
Input current range	200 mA, 200 mA, 120 mA (100 mA dc)
Current gain	10, 100, 1000
Input voltage range	2 V, 2 V, 1.2 V (1.0 V dc)
Transconductance	1,10,100 Siemens
Frequency	To 10 kHz
Maximum output compliance voltage	4.5 Vrms (6.4 Vpeak)
Inductive drive capability:	1 mH load
Output isolation, current terminal to earth	600 Vrms, 850 Vpeak, dc to 850 Hz
Performance specifications
AC accuracy, closed loop with 6105A	To 140 ppm
DC accuracy, standalone	To 160 ppm
AC accuracy, standalone	To 350 ppm
Phase angle accuracy	0.006°
Load dependent phase angle shift	<0.001° @ 60 Hz
General specifications
Input line voltage range	100 V to 240 V with up to ±10 % fluctuations
Transient overvoltage	Impulse withstand (overvoltage); Category II of IEC 60364-4-443
Frequency	47 Hz to 63 Hz
Maximum consumption	< 1500 VA
Calibration Documentation	Report of calibration with data included; 17025 accredited report optional
Dimensions with feet (H x W x L)	192 mm x 432 mm x 645 mm (7.6 inches x 17 inches x 25.5 inches)
Dimensions without feet (H x W x L)	178 mm x 432 mm x 645 mm (7 inches x 17 inches x 25.5 inches)
Weight	25 kg (54 lb.)
Design standards and compliance	Designed to EN 61010-1: 2010, CAN/CSA 22.2 No 61010.1-04, ANSI/UL 61010-1:2004, EN 61326-1:2006 CE marked, CSA listed
Operating temperature	5 °C to 35 °C
Calibration temperature range	16 °C to 30 °C
Warm up time	1 hour
Safe operating max. relative humidity (non-condensing)	<80 % 5 °C to 31 °C ramping linearly down to 50 % at 35 °C
Operating altitude	0 m to 2,500 m
Shock and vibration	MIL-PRF-28800F class 3
Specification confidence level	99%