Description

The Fluke 9607 Piston Gauge is a high-precision instrument designed for pressure measurement in various industrial applications. With its robust construction and advanced features, it provides accurate and reliable results.

Available from MME, this piston gauge is suitable for use in a range of environments, from laboratory settings to industrial plants.

Fluke 9607 Key Features

The Fluke 9607 Piston Gauge features a range of key specifications, including:

Operating temperature range: 15 °C to 35 °C (59 °F to 95 °F)
Operating humidity range: 5 % to 95 % RH, non-condensing
Weight: 34 kg (74 lb) for instrument platform
Dimensions: 34.1 cm x 54.3 cm x 52.3 cm (13.4 in x 21.4 in x 20.6 in)
Communication ports: RS-232, COM 1, COM 2, COM 3, and COM 4
Overall pressure range: 11 kPa to 500 kPa, 0.11 bar to 5 bar, (1.6 to 72.5 psi)

Who Needs the Fluke 9607?

The Fluke 9607 Piston Gauge is designed for use in a range of applications, including:

Industrial plants, laboratories, and research facilities where accurate pressure measurement is required.

Fluke 9607 Applications

Pressure measurement in industrial processes
Calibration of pressure sensors and transducers
Research and development of new pressure measurement technologies
Quality control and assurance in manufacturing
Testing and validation of pressure-containing equipment

Why Buy Fluke 9607 from Mohammad Mahdi Electronics?

At Mohammad Mahdi Electronics, we offer the Fluke 9607 Piston Gauge as part of our range of high-precision pressure measurement instruments. With our expertise and support, you can be confident in your ability to achieve accurate and reliable results.

Fluke 9607 Specifications

General specifications
Electrical power	85/264 V ac, 50/60 Hz, 22 VA maximum consumption
Temperature	Operating: 15 °C to 35 °C (59 °F to 95 °F) Storage: -20 °C to 70 °C (-4 °F to 158 °F)
Humidity	Operating: 5 % to 95 % RH, non-condensing
Weight	Instrument platform with no mass or piston-cylinder loaded PG9602/9607 (without vacuum hardware): 34 kg (74 lb) Remote electronics module: 1.9 kg (4 lb) PG terminal: 1.4 kg (3 lb) Optional vacuum reference hardware: 16 kg (36 lb)
Dimensions (H x W x D)	PG9602/9607 base (without vacuum hardware): 34.1 cm x 54.3 cm x 52.3 cm (13.4 in x 21.4 in x 20.6 in) (Height: top of piston-cylinder assembly) PG9602/9607 base (with optional vacuum bell jar and vacuum gauge connected): 56 cm x 54.3 cm x 52.3 cm (22 in x 21.4 in x 20.6 in) (Height: Top of bell jar) Remote electronics module: 10.2 cm x 35.1 cm x 19.6 cm (4 in x 13.8 in x 7.7 in) PG terminal: 12 cm x 15 cm x 20 cm (4.7 in x 5.9 in x 7.9 in)
Microprocessors	Instrument platform: Motorola 68302 PG terminal: Hitachi 64180
Communication ports	RS-232 COM 1: Host computer COM2: Residual vacuum sensor (external) COM3: Automated pressure controller COM4: Unused/spare IEEE-488 Host computer
Overall pressure range	Gauge: 11 kPa to 500 kPa, 0.11 bar to 5 bar, (1.6 to 72.5 psi)¹ Absolute: 11 kPa to 500 kPa, 0.11 bar to 5 bar, (1.6 to 72.5 psi)¹
Operating media	Gas: nitrogen, helium, dry air (dewpoint ≤ -40 ºC)
Maximum mass load	100 kg¹
Pressure connections	PG 9607 base Test port: DH200* Controlled clearance pressure: DH200* * Gland and collar fitting for 6.35 mm (0.25 in) coned and left hand threaded tubes. Equivalent to AE SF250C, HIP LF4, etc. AMH drive Quick connector equivalent to Swagelok QM Series (QM2-B-200). Use with DESO (double end shut off) type stem. AMH vent Quick connector equivalent to Swagelok QM Series (QM2-B-200). Use with SESO (single end shut off) type stem only. Remote electronics module ATM port: 10-32 UNF Vacuum bell jar 3x 40 mm ISO/KF flange, 1x 50 mm ISO/KF flange (top) CE conformance All PG9000 models conform to CE requirements