Mitutoyo 500-732-20 Coolant Proof Caliper

Mitutoyo 500-732-20 Coolant Proof Caliper

The jaws of the Mitutoyo 500-732-20 Coolant Proof Caliper include carbide tips and enable accurate measurements in a variety of situations.This product can display metric and inch sizes through a digital LCD.
One of the benefits of this product is that it has high water and dust resistance (protection level IP67), making it useful in machining scenarios where cooling liquid can be sprayed.

1. Function
2. First, make sure to “zero”/reset the LCD reading before taking a measurement.
3. When the display shows “0”, start rotating the thumb until the inner or outer jaws make firm contact with the object.
4. Use the outer (lower) jaws to read the outer diameter of an object and the inner (upper) jaws to measure the inner diameter.

working conditions

• Wet environments.
• Dusty environment.
• exposed to coolant.
• Machining.

Mitutoyo 500-732-20 Coolant Proof Caliper Features

• Excellent resistance against water and coolant.
• resistance dust (IP67 protection level).
• enabling use in machining situations that include splashing coolant fluid.
• It has a plastic box that is not affected by moisture and dust.
• Extraordinarily long battery life.
• Speed ​​in measurement readability.
• Accurate and sensitive.
• Resistant jaws.
• Metric and inch measurements.
• low weight

Mitutoyo 500-732-20 Coolant Proof Caliper Specifications

• Range:0-200mm / 0-8″
• Depth bar: flat
• Thumb roller: Yes
• Data output: No
• Max. Permissible Error E MPE: ±0,001″
• Max. Permissible Error S MPE: ±0,002″
• Digital step: 0,0005″/0,01 mm
• Max. response speed: Unlimited
• Display: LCD, character height 9 mm (150, 200 mm) 11 mm (300 mm)
• Delivered: In a case, including 1 SR-44 battery
• ORIGIN (ABS-Zero): Yes
• Auto Power OFF after 20 min. non use: Yes
• Low voltage alarm: Yes
• Battery life: Approx. 5 years under normal use
• Mass: 198g
• Accuracy:±0.02mm / ±0.0010″