Description

Thickness Gauge Calibration Blocks

The KUSOT-180 set of ultrasonic thickness calibration blocks is designed for testing and initial inspection during the production of ultrasonic contact thickness gauges.These calibration blocks are also used for verification, calibration, and metrological certification of ultrasonic thickness gauges.

The KUSOT-180 blocks are applicable in the following ranges:

0.2 to 300 mm for steel
1 to 300 mm for duralumin
1 to 100 mm for brass.

Thickness Gauge Calibration Blocks Specifications

No. of Set	Name of Set	Material	Nominal Thickness Values (mm)
No.1	Standard set of plane-parallel thickness blocks	Duralumin D16	1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 12; 15; 18; 20; 25; 30; 35; 40; 45; 50; 75; 90; 100
No.2	Standard set of plane-parallel thickness blocks	Steel 40H13	1; 2; 3; 4; 5; 6; 7; 8; 9; 10; 12; 15; 18; 20; 25; 30; 35; 40; 45; 50; 75; 90; 100
No.3	Standard set of plane-parallel thickness blocks	Steel 40H13, Duralumin D16	200; 300 (for both materials)

NOVOTEST Thickness Gauge Calibration Blocks

Thickness Gauge Calibration Blocks

Thickness Gauge Calibration Blocks Specifications

You may also like