PCE-LT 12 Cable Detector

Cable Detector PCE-LT 12

The voltage tester is a versatile measuring instrument. In addition to the usual voltage and current measurements, the voltage tester additionally has a network analysis. With this network analysis, the voltage tester may be used to test, for example, LAN connections for his or her correct wiring and characteristic. Telephone connections also can be checked for his or her function with this voltage tester. If cables cannot be determined again, the voltage tester additionally enables here.

Thanks to the cable finder function of the voltage tester, the operator can discover the specified cable very quickly at all. To do this, the voltage tester need to be linked to the relationship of a cable. The voltage tester now acts as a transmitter. With the provided receiver you may now easily find the desired cable in, for example, a wiring harness or at the back of partitions with the voltage tester.

To test whether or not a voltage is implemented to a cable, the voltage tester has an NCV (Not Connected Voltage) function. With this function, the voltage tester must simplest be held to the line. Both acoustically and visually, the voltage tester signals the operator that a voltage is applied to the line. Thanks to this contactless measuring function, the voltage tester reduces injuries at paintings because of electric shock.

– Extensive network connection testing
– Telephone connection examination
– Acoustic cable finder function
– Robust housing for mobile use
– Voltage, current, resistance measurement
– Contactless voltage detection

Cable Detector PCE-LT 12 Specifications:

• Range selection: Automatically and manually
• Measurement with receiver: Detecting cable bridges, detecting cable runs
• Measurement with network function: Detection of open and closed circuits

wrong connection, “split pair”, “reverse” connection,
Network integration test, screening test

• Further measurement function: “NCV” detection, telephone connection testing
• Display: LCD, 1999 digits
• Overload indicator: “OIL”
• Automatic shutdown: After 15 minutes of inactivity
• Fuses: F10A / 500V, F200mA / 1000A
• Battery indicator: Display when battery is discharged
• Power supply : 9V block battery
• Operating conditions: 0 … 40°C / 32 … 104°F

-10 … 50°C / 14 … 122°F

• Dimensions: 195 x 92 x 55 mm / 7.7 x 3.6 x 2.2 in
• Weight: Approx. 400 g / < 1 lb (with batteries)