PCE-CLT 10 Cable Fault Meter

Buy Cable Fault Meter PCE-CLT 10

The cable length measuring tool PCE-CLT 10 is a multifunctional tool that allows excessive accuracy and speedy dimension outcomes. If used appropriately, the cable length meter may be used to degree cables that have already been set up and are nonetheless to be set up. The cable length measuring tool may be used to decide cable lengths of up to 3 kilometers. This is completed via way of means of a time area reflectometer. On the cable length measuring tool itself, 20 popular styles of cables are pre-saved and in addition storage of as much as 99 cable sorts is likewise viable at the tool itself. The saved statistics may be considered immediately at the tool and may be used as required. Due to the integrated generation, relatively quick cables can already be tested. The minimal period that a cable needs to have, which ought to be tested with the Cable Length Gauge.

To increase battery life, the tool robotically shuts off after 10 mins of inactivity. This computerized shutdown may be set personally via way of means of the consumer at durations of 10 mins. In addition to the automated shutdown, the tool offers a bright TFT display, which makes a short analysis of the dimension outcomes additionally viable because of its backlighting.

– High measuring accuracy up to 3000 m / 9842.5 ft
– Results after a short measuring time
– 2.4″ TFT color display
– Automatic shutdown adjustable
– Illuminated TFT display
– 20 pre-set cable types

Cable Fault Meter PCE-CLT 10 Specifications

The PCE-CLT 10 Cable Fault Meter is a specialized device designed for testing faults with output of the impedance control in cables. Here are its key specifications:

• Measuring range cable length                   Depending on the propagation speed of the tested cables
  • 5 … 3000 m / 16.4 … 9842.5 ft with shortening factor ≤99.9%
  • 5 … 2400 m / 16.4 … 7874.0 ft with shortening factor ≤80.0%
  • 5 … 2000 m / 16.4 … 6561.7 ft with shortening factor ≤66.0%
  • 5 … 1500 m / 16.4 … 4921.3 ft with shortening factor ≤50.0%
• Measurement units : m, ft
• Resolution: 0.1 m
• Measuring principle: Time domain reflectometer
• Selection area: Automatic control range
• Measurement accuracy : ± [2% of reading ± 0.2 m] <100 m
  ± [2% of reading ± 0.5 m] ≤100 m
• Impedance selector Automatic: output of the impedance control
• Shortening factor / propagation speed Adjustable from 1.0 … 99.9%
• Cable types: 20 standard cables
• Memory : 99 memory slots for individual cables
• Connector type: BNC, RJ45
• Power supply : 2 x 1.5V AA battery
• Battery status indicator: Yes
• Automatic shutdown: Adjustable between 10 and 60 minutes
• Menu languages: German, English
• Operating temperature: 0 … 40°C / 32 … 104°F
• Storage temperature: -10 … 50°C / 14 … 122°F
• Relative humidity: 0 … 80% rel. humidity

The PCE-CLT 10 Cable Fault Meter is an essential tool for anyone who needs cable tester.