MOHAMMAD MAHDI Electronics Trading LLC
Fluke 810 Vibration Tester Review: Machine Fault Diagnosis, Features & Specifications
0
🛠️
Fault Diagnosis
Unbalance, looseness, misalignment, and bearing failures.
🎯
Severity Scale
Slight, moderate, serious, and extreme fault levels.
📡
Laser Tachometer
Built-in RPM measurement from 6.0 to 99,999 rpm.
💾
PC Reporting
Viewer software for reporting, setups, and image storage.
Fluke 810: A Diagnosis, Not Just a Number
The Fluke 810 is the most advanced troubleshooting tool for vibration-based mechanical maintenance. Unlike basic vibration meters that only show levels, this tester applies a built-in diagnostic engine and step-by-step workflow to identify the likely fault, report its severity, and suggest repair actions.
It is designed to help maintenance teams make fast, confident decisions on motors, pumps, fans, compressors, gearboxes, couplings, belts, chains, and other rotating equipment — making it ideal for predictive maintenance programs where downtime must be prevented before it happens.
Best For
Motors
Pumps
Fans
Compressors
Gearboxes
Spindles
Pumps
Fans
Compressors
Gearboxes
Spindles
Core Benefit
Turn vibration data into a clear fault diagnosis with severity guidance.
Key Features
Built for quick field diagnostics and maintenance decisions
🔍
On-board fault identification
Detects and locates common mechanical issues directly on the instrument.
⚠️
Four-level severity scale
Slight, moderate, serious, and extreme — with repair guidance.
🧭
Guided workflow
Simple process for technicians without deep vibration-analysis expertise.
🖥️
Viewer PC software
Create setups, expand storage, generate reports, and review spectra in detail.
What Faults Does the Fluke 810 Detect?
The Fluke 810 focuses on the most common machine problems that cause downtime and costly repair work. It identifies the fault type, gives a plain-text diagnosis, shows fault severity, and provides repair details with cited peaks and spectra.
Unbalance
Detects rotor or mass imbalance issues.
Looseness
Finds mechanical looseness and mounting problems.
Misalignment
Identifies coupling and shaft alignment faults.
Bearing Failures
Helps reveal bearing wear and damage early.
Full Specifications
| Parameter | Value | Notes |
|---|---|---|
| Function | Vibration diagnosis | Built for machine fault detection and troubleshooting |
| Faults detected | Unbalance, looseness, misalignment, bearing failures | The core diagnostic fault set |
| Severity scale | Slight, moderate, serious, extreme | Four-level severity with repair guidance |
| Tachometer | Built-in laser | Measures running speed accurately |
| Tachometer range | 6.0 rpm to 99,999 rpm | Class 2 laser diode detection |
| Tachometer resolution | 0.1 rpm | High-resolution speed measurement |
| Effective tachometer range | 1 cm to 100 cm | Practical working distance for field use |
| Display | 5.7 in color TFT LCD, 320 × 240 | ¼ VGA with LED backlight |
| Memory | 2 GB internal + micro SD slot | Expandable non-volatile storage |
| Battery | Lithium-ion, 14.8 V, 2.55 Ah | About 8 hours discharge time |
| Charging time | 3 hours | Quick turnaround for daily field work |
| Dimensions | 18.56 × 7.00 × 26.72 cm | Height × Depth × Width |
| Weight | 1.9 kg | With battery installed |
| Operating system | WinCE 6.0 Core | Used for the tester’s interface and software functions |
Sensor Specifications
- Sensor type: Accelerometer
- Sensitivity: 100 mV/g (±5%, 25 °C)
- Acceleration range: 80 g peak
- Frequency response: Z 2 to 7000 Hz, X/Y 2 to 5000 Hz
- Mounting: 10-32 captive socket head screw or 2-pole rare earth magnet
- Output connector: 4-pin M12
- Construction: 316L stainless steel, hermetic sealing
Diagnostic Engine Highlights
- A/D converter: 4 channel, 24 bit
- Usable frequency bandwidth: 5 Hz to 20 kHz
- Sampling rate: 2.56 kHz to 51.2 kHz
- Dynamic range: 128 dB
- Signal-to-noise ratio: 100 dB
- FFT resolution: 800 lines
- Amplitude units: in/sec, mm/sec, VdB, VdB*
Viewer PC Software
The included Viewer software expands data storage and tracking capability, helping you generate diagnostic reports, create machine setups on a computer, and transfer them to the tester.
- Detailed spectra review
- Machine setup creation on PC
- Import and storage of JPEG and Fluke IS2 thermal images
- Severity tracking over time
Included Accessories
- Tri-axial TEDS accelerometer
- Accelerometer magnet mount and adhesive pad kit
- Quick-disconnect cable
- Laser tachometer and storage pouch
- Smart battery pack with adapters
- Viewer PC software and mini-USB cable
- Hard carrying case
- Getting started guide, quick reference guide, manual CD-ROM, training DVD
Ideal Applications
Motors and motor-driven systems
Pumps and pump trains
Fans and blowers
Compressors and gearboxes
Belts, chain drives, and couplings
Closed-coupled machines and spindles
فلوك 810 — جهاز اختبار الاهتزاز
يُعد جهاز Fluke 810 جهاز اختبار اهتزاز محمول لا يكتفي بالقياس بل يشخّص الأعطال الميكانيكية: تآكل المحامل، وعدم المحاذاة، وعدم الاتزان، والارتخاء — مع تقييم شدّة العطل.
تشخيص أعطال المحامل والمحاذاة والاتزان والارتخاء
مقياس شدّة من أربع مستويات مع توصيات الإصلاح
تاكومتر ليزري مدمج لقياس الدوران
مثالي للصيانة التنبّؤية للمعدات الدوّارة
Need Price & Stock Availability?
Contact our sales team for current availability, quotation, and delivery details for the Fluke 810.
Get Price & Stock on WhatsApp / استعلام السعر والتوفر واتساب
حتى إذا لم يكن المنتج موجودًا على الموقع، سيتواصل فريق المبيعات بسرعة.
Call: 04 447 6031
What makes the Fluke 810 different
It diagnoses the fault and its severity, not just a vibration value
Does Fluke 810 measure RPM
Yes, with a built-in laser tachometer
June 9, 2026
No Comments
June 9, 2026
No Comments
June 9, 2026
No Comments
June 9, 2026
No Comments
June 8, 2026
No Comments
Featured Thermal Camera
Featured Multimeters
Other Blogs
د.إ0.00 (excl.VAT)
(5 reviews)
د.إ0.00 (excl.VAT)
(4 reviews)
Featured Clamp Meters
Recent posts
June 9, 2026
No Comments
June 9, 2026
No Comments
June 9, 2026
No Comments
Bench Multimeters