Fluke 925 Vane Anemometer

The Fluke 925 Vane Anemometer is a compact handheld airflow meter for HVAC, building services, and maintenance teams that need fast, reliable checks of air velocity, airflow volume, and temperature in ducts, grilles, and ventilation systems. Its 70 mm vane sensor and clear display support both quick spot checks and multi-point duct traversals where system balance and indoor air performance matter.

Built for field use, the Fluke 925 covers a practical velocity range with automatic range switching, reports airflow in CMS and CFM, and includes Data Hold, MIN/MAX, and average memory so technicians can capture stable readings without carrying extra logging gear.

Fluke 925 Key Features

The Fluke 925 combines a wide measurement envelope with operator-friendly controls for everyday HVAC airflow assessment. Measure air velocity from 0.40 to 25.00 m/s (80 to 4900 ft/min), calculate airflow in m³/sec (CMS) or ft³/min (CFM), and read temperature from 0 °C to 50 °C (32 °F to 122 °F) with the built-in thermistor. Memory tools help document peak, low, and average values during balancing or troubleshooting visits.

• Air velocity: 0.40–10.00 m/s (±0.5 m/s) and 10.00–25.00 m/s (±0.75 m/s)
• Airflow units: CMS (m³/sec) and CFM (ft³/min)
• Temperature range: 0 °C to 50 °C (32 °F to 122 °F)
• Data Hold freezes the displayed reading for recording
• MIN/MAX memory records minimum and maximum values
• Average memory: single point up to 2 hours or up to 8 multi-point readings
• Auto power-off sleep mode after 20 minutes (bypass available)
• Vane sensor head diameter: 70 mm

Who Needs the Fluke 925?

HVAC contractors use the Fluke 925 to balance supply and return airflow, verify fan performance, and confirm that designed CFM/CMS targets are met at diffusers and registers. Building services engineers rely on it to check ventilation rates against project specifications and energy-efficiency goals. Maintenance technicians deploy it when investigating poor circulation, filter loading, or underperforming blowers.

Facility and commissioning teams also benefit: the instrument is compact enough for a tool bag, quick to set up at vents and enclosures, and clear enough for consistent handoffs between shifts. Consulting engineers preparing performance reports can capture held and averaged values on site without a separate data logger for basic surveys.

Fluke 925 Applications

• Commercial HVAC balancing — measure supply/return velocities at diffusers and grilles; adjust dampers to design airflow
• Industrial exhaust verification — confirm fans and hoods deliver required capture and exhaust rates
• Data center cooling checks — validate cold-aisle / containment airflow volumes for thermal management
• Retail and office comfort — spot-check even air distribution across occupied floors
• Filter and fan troubleshooting — compare upstream/downstream readings to locate restrictions
• Commissioning documentation — store MIN/MAX and multi-point averages for handover reports

Why Buy Fluke 925 from MME?

Buy the Fluke 925 Vane Anemometer from MME (mme-ae / Mohammad Mahdi Electronics) for genuine Fluke stock, clear product support, and delivery across the UAE. We focus on authentic instruments and practical guidance so your team can specify and deploy the right airflow meter without delay.

Need help matching the Fluke 925 to a duct survey, balancing job, or maintenance kit? Contact mme-ae for availability and technical clarification before you order. Genuine product, warranty-backed support, and responsive service from Mohammad Mahdi Electronics.

Fluke 925 Specifications

Ready to measure? Order the Fluke 925 Vane Anemometer from MME today and keep ventilation systems performing to spec with a tool built for accuracy and daily field use.