SKF TKBA 10 Belt Alignment Tool

SKF TKBA 10 Belt Alignment Tool

The SKF TKBA 10 Belt Alignment Tool is a hand-held instrument designed to quickly and accurately measure the alignment of belt-driven machinery. This tool uses laser technology to measure the alignment of the pulley and can detect horizontal and vertical deviations.

SKF Belt Alignment Tool TKBA 10 is easy to use and requires no special training or expertise. Simply attach the tool to the pulley or pulley with the included brackets, then use the laser to align the pulleys. The instrument displays the results on a digital display, allowing you to quickly and easily make any necessary adjustments.

Proper alignment of belt drive machinery is essential to reduce wear on belts, pulleys, and bearings and can help prolong the life of your equipment. The SKF TKBA 10 Belt Alignment Tool is a reliable and effective way to ensure your machines are properly aligned, which can save you time and money in the long run.

SKF  TKBA 10 Features

• Powerful magnets allow fast and easy attachment
• Facilitates simultaneous adjustment of tension and alignment
• Can be used on almost all machines using V belts, banded belts, ribbed belts, and most other belts as well as chain sprockets

TKBA 10 SKF Specifications

• Type of laser: Red laser diode
• Laser:1x Built-in class 2 laser, <1 mW, 635 nm
• Laserline length: 2 m at 2 m (6.6 ft at 6.6 ft)
• Measurement accuracy angular: Better than 0,02° at 2 m (6.6 ft)
• Measurement accuracy offset: Better than 0,5 mm (0.02 in.)
• Measurement distance: 50 mm to 3 000 mm (2 in. to 10 ft)
• Control: Laser on/off rocker switch
• Housing material: Aluminum, powder coat finish
• Dimensions:

• Transmitter unit:169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.)
• Receiver unit: 169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.)
• Reflector dimensions: 22 x 32 mm (0.9 x 1.3 in.)

• Weight

• Transmitter unit: 365 g (0.8 lbs)
• Receiver unit: 340 g (0.7 lbs)

• Mounting: Magnetic, side-mounted
• V-guides: N/A
• Battery: 2x AAA Alkaline type IEC LR03
• Operation time: 25 hours of continuous operation
• Carrying case dimensions: 260 x 85 x 180 mm (10.3 x 3.4 x 7.0 in.)
• Total weight (incl. case): 1,3 kg (2.9 lbs)
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Storage temperature: –20 to +60 °C (–4 to +140 °F)
• Relative humidity: 10 to 90% RH non-condensing
• IP rating: IP 40
• Calibration certificate: Valid for two years
• Case contents:

• 1x TKBA 10 receiver unit
• 2x AAA batteries
• 1x Printed instructions for use
• 1x Calibration certificate