Elcometer 106 Pull-Off Adhesion Tester

Elcometer 106 Pull-Off Adhesion Tester

An adhesive is used to attach a test dolly to the coating. The spring system inside the Elcometer 106 adhesion tester lifts the dolly as the tension is raised.

An indication on the scale displays the numerical value of adhesion strength when the coating is taken off the surface in terms of the force per unit area needed to remove the covering.

Transport side testing is required to determine the failure mode.

To increase sensitivity at low values ​​or for uneven surfaces, a 40 mm (1.52″) slide is available. When a 40 mm (1.52″) slide is used, divide the reading. of the scale for 4.

To get more information please contact us mme.

Elcometer 106 Features

• Supplied in a carry case – ideal for site tests
• Hand operated – no power supply necessary
• Includes a cutter for EN13144 and ISO 4624 tests

Elcometer 106 Specifications

Accessories

• Elcometer AVU Adhesion Verification Unit
• Spare Dollies 20mm (0.76”) Diameter (Pack of 10)
• Spare Dollies 20mm (0.76”) Diameter (Pack of 100)
• Large Dollies 40mm (1.52″) Diameter (Pack of 5)
• Large Base Ring for 40mm (1.52”) Dollies
• Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes
• Dolly Cutter