KIMO M75 Installation tester for safety tests

KIMO M75 Installation tester for safety tests

KIMO M75 installation tester for safety tests according to IEC 64-8 with TRMS multimeter function and cable mapping test in LAN networks RJ-45 – HV000075. M75 is used for safety testing of electrical installations, i.e. measurement of total earth resistance to be RCD type A and AC differential, insulation, and continuity test. To make the device versatile and fully functional for every end user, the device is equipped with an innovative AUTO function: by selecting this function and setting only the current value of the M75 RCD connected to the power outlet, it will be carried sequentially.

Perform an earth resistance test, an RCD test, and an insulation test. At the end of the test, the test device displays all the results and shows whether the test is passed or failed with simple OK or FAIL signs. To buy a KIMO M75 Installation tester for safety at the lowest price, visit our experts.

KIMO M75 Installation Tester FEATURES

• The M75 is a mobile device in the truest sense of the word! HT recommends that operators who primarily work on residential installations ALWAYS have the M75 on hand.
• The is very easy to use, has a very small footprint, and carries out all the necessary tests to determine the COMPATIBILITY (and therefore the SAFETY) of your private electrical system fully automatically.
• ALWAYS use it before starting any work on an existing installation unfamiliar to the operator.
• ALWAYS use it at the end of the work, it ensures the necessary safety for both operators and users of the electrical installations.
• Thanks to its small size, this device offers many possible uses.

KIMO M75 SPECIFICATIONS

• Functions: AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence, TRMS
• Insulation with voltage 50, 100, 250, 500, 1000VDC 250V, 500V
• Continuity of protective circuit with 200mA
• Tripping time and current of RCDs A=30mA AC=300mA only general
• Non-trip earth resistance, Contact voltage, Phase sequence, Leakage current with an optional clamp meter
• Protection category CAT III 550V
• DC/AC TRMS voltage and current, Frequency, Resistance, Continuity with buzzer
• Size (LxWx H) (mm) 240x100x45, Weight in grams (batteries included) 450
• Guidelines: CEI 64-8, CEI 64-8 612.2, CEI 64-8 612.3 .4 .5, CE MARK
• EMC 2014/30/EU, EMC: IEC/EN61326, EN61008
• IEC/EN61010-1, IEC/EN61557-1, IEC/EN61557-2, IEC/EN61557-3, IEC/EN61557-4, IEC/EN61557-6
• IEC/EN61557-7, LVD 2014/35/EU, TIA 568B. UNE20460