CEM DT-6650 Multifunction Installation Tester
The CEM DT-6650 Multifunction Installation Tester is an advanced tool designed for comprehensive testing and verification of electrical installations in residential, commercial, and industrial environments. This robust device provides a suite of essential testing functions, ensuring installations comply with regulatory standards for safety and efficiency.
MME Shopping Event
Hurry and get discounts on Most of MME Products up to 20%
Call for Price
CEM DT-6650 Multifunction Installation Tester
The CEM DT-6650 Multifunction Installation Tester is an advanced tool designed for comprehensive testing and verification of electrical installations in residential, commercial, and industrial environments. This robust device provides a suite of essential testing functions, ensuring installations comply with regulatory standards for safety and efficiency.
Key features of the CEM DT-6650 include its ability to measure insulation resistance, loop impedance, RCD (Residual Current Device) testing, and earth resistance. These capabilities are critical for ensuring that electrical systems are installed correctly and are safe to use. Additionally, the device can perform line voltage measurements and phase sequence testing, which are vital for verifying the correct operation of three-phase systems.
The tester is designed for ease of use, with a user-friendly interface and a clear display that guides technicians through each test procedure. Its rugged design makes it suitable for use in challenging field conditions, and it comes equipped with a protective case that guards against impacts and the elements.
Safety is a key focus of the CEM DT-6650, featuring built-in safety precautions that protect both the user and the equipment under test. It meets international safety standards, including IEC 61010, and is rated for CAT III 600V environments, ensuring reliable performance in diverse settings.
The versatility of the CEM DT-6650 makes it an invaluable tool for electrical professionals. Whether for routine maintenance checks, troubleshooting, or new installations, this multifunction tester delivers reliable data that helps maintain electrical safety and functionality across various types of electrical systems. Its portability and comprehensive testing capabilities make it an essential instrument for any electrical technician’s toolkit.
CEM DT-6650 Multifunction Installation Tester Specifications:
Insulation | |||||
Terminal Voltage | Range | Max Resolution | Accuracy | Test Current | Short circuit current |
125V (0% ~ +10) | 0.125~4000MΩ | 0.001MΩ | ±(2%+10) | 1mA@load 125kΩ | ≤1mA |
250V (0% ~ +10) | 0.250~4000MΩ | 0.001MΩ | ±(2%+10) | 1mA@load 250kΩ | ≤1mA |
500V (0% ~ +10) | 0.500~4000MΩ | 0.001MΩ | ±(2%+10) | 1mA@load 500kΩ | ≤1mA |
1000V (0% ~ +10) | 1.000~4000MΩ | 0.001MΩ | ±(3%+10) | 1mA@load 1MΩ | ≤1mA |
Low OHM | |||||
Range | Resolution | Accuracy | Max. open Circuit Voltage | Overload Protection | |
4.000Ω | 0.001Ω | ±(1.5%+30) | 5.8V | 250Vrms | |
40.00Ω | 0.01Ω | ±(1.5%+3) | |||
400.0Ω | 0.1Ω | ||||
Continuity Beeper | |||||
Range | Resolution | Operation Resistance | Max. open Circuit Voltage | Overload Protection | |
Continuity | 0.01Ω | Resistance≤35Ω | 5.0V±1VDC | 250Vrms | |
Short circuit current | ≥200mA | ||||
LOOP Resistance | |||||
L-PE (Hi-Amp) | |||||
Range (Ω) | Max. Resolution (Ω) | Accuracy | |||
0.00~999 | 0.01 | ±(4% of reading+6 digits) | |||
L-PE(No Trip): Measuring Current:15mA / Range of the Voltage Used: 195V a.c.~260V a.c.(56,60Hz) | |||||
Range (Ω) | Resolution (Ω) | Accuracy | |||
0.00~999 | 0.01 | ±(5% of reading+6 digits) | |||
L-N: Measuring Current:2.0A / Range of the Voltage Used:195V a.c.~260V a.c.(56,60Hz) | |||||
Range (Ω) | Max. Resolution (Ω) | Accuracy | |||
0.00~999 | 0.01 | ±(4% of reading+4 digits) | |||
RCD Testing | |||||
Test current | Accuracy | ||||
x1/2, x1, x2, x5 | 1.5%~ -9% | ||||
Voltage and Frequency | |||||
Measurement Range (V)/ AC-DC | Resolution | Accuracy | |||
80-500V/(45-400Hz) | 1V | ±(2% of reading+2 digits) |
You must be logged in to post a review.
Brand
Cem
CEM Corporation Overview
CEM Corporation, founded in 1978, is renowned for its pioneering contributions to scientific instrumentation with a focus on microwave-based technology for laboratory and research applications. The founders—Dr. Michael J. Collins (Chemist), Ronald Goetchius (Electrical Engineer), and Bill Cruse Jr. (Mechanical Engineer)—launched the company with a novel concept for microwave drying that significantly expedited moisture and solids analysis processes from hours down to minutes, which was a groundbreaking improvement at the time.Product Innovation and Evolution
Over the years, CEM Corporation has expanded its product offerings beyond its original microwave moisture/solids analysis systems. Their portfolio now includes systems for:- Acid digestion for elemental analysis
- Compositional testing of food products
- Peptide and chemical synthesis
Specifications
Related Products
FLUKE 28 II EX Intrinsically Safe Digital Multimeter
In stock
Fluke 289 TRMS Epic Logging Multimeter with TrendCapture
In stock
Fluke 368 FC Leakage Current Clamp Meter
In stock
Fluke 233 Remote Display Digital Multimeter
In stock
FLUKE 116 Approved HVAC Multimeter with Temperature
In stock
FLUKE 115 Digital Multimeter High Quality
In stock
Reviews
Clear filtersThere are no reviews yet.