DAKOTA ULTRASONICS CMX THICKNESS

DAKOTA ULTRASONICS CMX THICKNESS SOUND SOLUTION

DAKOTA ULTRASONICS CMX THICKNESS  v2.0 has all the functionality of ZX gauges with many advanced features. Simultaneously measure material and coating thickness through the single-mode pit and flaw detection (PECT). Automatic probe zeroing, automatic probe recognition, and automatic temperature compensation are also available. Also available are large-digit and B-scan display options, up to 64 user-definable custom parameters, a selectable converter table for precise linearity, and calibration options for materials and coatings.

The 12dB, a 5-position gain switch allows the user to customize specific material types and thrive in common but difficult application scenarios. The built-in TDG (Time Dependent Gain) function is included in our list of converters for use with damping materials. This counter is really packed with tons of extra features and benefits. Everything is very well packaged in a small portable aluminum frame to ensure durability. USB-C connectivity, internal 4GB SD memory with a file system. Screenshot in TIF format. DakView software for PC or MAC OSX is also part of the kit. Visit our experts to buy a counter full of additional features and benefits called DAKOTA ULTRASONICS CMX THICKNESS.

DAKOTA ULTRASONICS CMX THICKNESS FEATURES

• For thickness or bottom & amp; Flaw detection
• Dual channel: Two transmitters and receivers
• Pulse repetition rates up to 250 Hz
• Coating thickness measurements
• Display update rate 25 Hz
• Temperature compensation
• Measurement range 0.025 to 48 inches (thickness)
  0.001 to 0.100 inches (coating thickness)
• Resolution ±0.001 in.
• Adjustable gain 40 to 52 dB
• Internal 4GB SD memory card
• Stores up to 64 custom settings
• USB-C port

DAKOTA ULTRASONICS CMX THICKNESS SPECIFICATIONS

• Weight: 13.5 ounces (with batteries), Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
• Operating Temperature: -14° to 140°F (-10° to 60°C).
• Keyboard: Membrane switch with twelve tactile keys.
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Data Output: USB-C port. Windows® PC interface software.
• Display: 1/8 in. VGA grayscale display(240 x 160 pixels), Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
  EL backlit (on/off/auto).
• Range: Pulse-Echo Mode (P-E): (Pit &law Detection) measures from 0.025 48.0 inches (0.63 to 1219.2 millimeters).
• Pulse-Echo Coating Mode (PECT): (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 48.0 inches (0.63 to 1219.2 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
• Pulse-Echo Temp Comp Mode (PETP): (Pit &law Detection) Auto temperature compensation – measures from 0.025 48.0 inches (0.63 to 1219.2 millimeters).
• Echo-Echo Mode (E-E): Thru Paint & Coatings) measures from 0.100 to 6.0 inches (2.54 to 152.4 millimeters). The range will vary +/- depending on the coating.
• Echo-Echo Mode (E-EV): Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.
• Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). The range will vary +/- depending on the coating.
• Resolution: +/- .001 inches (0.01 mm)
• Velocity Range: .0122 to .7300 in./ms (309.88 to 18542 meters/sec)
• Calibration: Single and Two point calibration options for material & coating, or selection of basic material types.
• Units: English & Metric
• Log Formats: Grid (alphanumeric), Sequential (auto identifier), Capacity: 4 Gb internal SD card, Screen Capture: Bitmap graphic capture for quick documentation (.tif), OBSTRUCT to indicate inaccessible locations.
• Measurement Modes: Coating Off: Pulse-Echo (P-E), Coating On Pulse-Echo Coating (PECT), Temp Comp: Pulse-Echo (PETP), Thru-Paint: Echo-Echo (E-E), Thru-Paint Verify: Echo-Echo Verify (E-EV), Coating Only: Coating (CT), Pulser: Dual square wave pulses, Receiver: Dual receivers – manual or AGC gain control with 110dB range (limited), Timing: Precision TCXO timing with single shot 100MHz 8-bit ultra low power digitizer.
• Line Power: USB to PC or power outlet, Three 1.5V alkaline or 1.2V NiCad AA cells., Alkaline: grayscale 35 hrs, color 12 hrs., Nicad: grayscale 10 hrs, color 5 hrs, NI-MH: grayscale 35 hrs, color 12 hrs, Power saving DIM (color), Auto power off if idle 5 min, Battery status icon.
• Log Formats: Grid (alphanumeric), Sequential (auto identifier), Capacity: 4 Gb internal SD card, Screen Capture: Bitmap graphic capture for quick documentation (.tif), OBSTRUCT to indicate inaccessible locations.
• Output: Direct USB-C 1.1 PC connectivity, Transducer Connections: Two LEMO 00 connectors.
• Transducer Types: Dual Element (1 to 10 MHz), Locking quick disconnect “00” LEMO connectors, Standard 4-foot cable., Custom transducers and cable lengths are available for special applications.
• Factory calibration is traceable to NIST & MIL-STD-45662A.
• 2 year limited