Elcometer FD800 Bench Top Flaw Detectors

Elcometer FD800 BenchTop Flaw Detectors

The Elcometer FD800 fault finder/thickness gauge is an ultrasonic flaw detector that combines state-of-the-art flaw detection with advanced material thickness capabilities.

The Elcometer FD800 is designed for laboratory use, these gauges are the tools you need for all your troubleshooting needs. The Time Corrected Gain (TCG) feature automatically compensates for sound attenuation through a material, further enhancing gauge performance.

The gauge’s performance is further improved by the time-corrected gain (TCG) feature, which automatically corrects for sound attenuation caused by a material.

The FD800DL+ has 6GB internal memory and an external SD slot, allowing up to 64GB with full data logging via RS232 data output to ElcoMaster® data management software.

In the FD800DL+ network category, the device allows the user to enter “OBSTRUCT” into the network to identify inaccessible locations for easy measurement.

Detection types: fault TRIG, DAC, AWS, TCG, zero crossing, edge, peak measurement mode 1 PE, PETP (temperature compensation), EE (ThruPaint™), EEV, CT (coating), and PEC

Capabilities

• OBSTRUCT indicates inaccessible locations
• Single, two-point, speed, material type calibration options
• Automatic converter detection
• V-path / dual-path error correction automatically
• Automatic zero probe
• Automatic longitudinal (straight) or shear (angle) calibration
• Types of single-contact, double, delayed, and angular probes
• The material velocity table includes longitudinal and shear velocities for various materials
• TRIG Trigonometric display of beam path, depth, surface distance, and curved surface correction. Used with angle beam transducers.

Elcometer FD800 fault finder Specification:

• Display mode: the display of material thickness figures
• Display: Cross-sectional B-Scan
• Scan Display: with numbers
• Display the scan bar
• Show the thickness of the coating
• Display: A-Scan + Rectified, – Rectified, Full Waveform (RF)Scan bar: 6 readings
• per second
• Velocity calibration range: 256 – 16000 m/s (0.0100 – 0.6300 in/s)
• Differential mode
• Alert mode
• B-Scan screen speed adjustable display speed
• adjustable damping; Impedance matching to optimize converter performance
• FD800DL type pulser: two adjustable square wave pulses.
• FD800DL+: two-tone burst pulses
• Manual, automatic gain control (AGC) with 110 dB range with 0.2 dB resolution
• Accurate TCXO Timing with 8-Bit 100MHz Single-Shot Digitizer
• Memory: 6 GB internal and up to 64 GB external SD slot (capturing bitmap
• graphics, sequential and network recording, alphanumerical batch identification)
• FD800DL & FD800DL+ Frequency Bands: Bandwidth 1.8 – 19 MHz (-3dB).
• Four narrow bands at 1, 2, 5, 10 MHz, FD800DL+: additional narrow bands at 0.5
• MHz, 15 MHz
• Horizontal linearity: +/- 0.4% FSW
• Vertical line: +/- 1% FSH
• Amplifier linearity: +/- 1 dB
• Measuring range: 0 to 100% FSH, with 1% resolution
• Lag 0 – 999 in (25375 mm) at steel speed
• Display: Blanview QVGA TFT color screen readable in sunlight. Viewable screen
• 115.2 x 86.4 mm (4.54 x 3.40 inches)
• 60 Hz display refresh rate
• Unit (selectable) mm or inch
• Adjustable backlight brightness
• Repeatability/stability indicator
• Battery type 6 x AA alkaline
• Low battery indicator
• Automatic battery-saving mode