Hanyoung BX8

– PID auto tuning
– Multi inputs (various sensor inputs)

Hanyoung BX8 Specification:

• Sampling Cycle: 250 ms
• Input Display Resolution: Basically, below the decimal point of the input signal and measuring range
• Input Impedance: Thermocouple or mV input : above 1 MΩ, d.c V input : approx. 1 MΩ
• Permissible resistance of signal source Thermocouple : below 250 Ω, Voltage : below 2 kΩ
• Permissible wiring resistance RTD : below 150 Ω / single wire(but, the resistance of the 3 wires should be the same
• Permissible input resistance: Within ±10V(Thermocouple, RTD, Voltage : mV d.c), Within ±20V(Voltage : V d.c)
• Noise rejection ratio NMRR(normal mode) : above 40 dB, CMRR(common mode) : above 120 dB (50/60 Hz ±1%)
• Applied standard: Thermocouple / RTD(KS / IEC / DIN)
• Compensation error at standard contact: ±1.5 °C(15 ~ 35 °C), ±2.0 °C(0 ~ 50 °C)
• Measuring Accuracy: ±0.5%(FULL SCALE)
• Power of operating sensors: 20 V d.c(internal resistance 1.2 kΩ) Max. 50 mA, 15 V d.c (internal resistance 790 Ω)