KIMO HT2055 Step and contact meter up to 50A

KIMO HT2055  Step and contact meter up to 50A

The KIMO HT2055  Step and contact meter consist of a power pack and a voltmeter, necessary for measuring step and touch voltages in industrial electrical installations (TN networks, substations) with a nominal test current of up to 50A. Two time and current synchronized units are able to ensure the correct value of the step and touch voltages, consistent with the RMS current values ​​measured by the power supply and also taking into account the interference effects found in the tested circuit.

It also allows the measurement of earth resistance and earth resistance using the classic voltammetric method. These measurements can be stored in the voltmeter’s internal memory and downloaded to a PC using the supplied Windows software. To buy a KIMO HT2055 step and contact meter with minimum time and cost, visit our experts.

KIMO HT2055  Step and contact meter Features:

• The HT2055 consists of a power pack and a voltmeter, necessary for measuring step and touch voltages in industrial electrical installations (TN networks, substations) with a nominal test current of up to 50A.
• Two time and current synchronized units are able to ensure the correct value of the step and touch voltages, which corresponds to the actual current values ​​measured by the power section and also takes into account the perturbation effects in the measured circuit.
• It also allows earth resistance and resistivity to be measured using the classic voltammetric method.
• These measurements can be stored in the voltmeter’s internal memory and downloaded to a PC using the supplied Windows software.

KIMO HT2055 Specifications:

• Functions: TERMS, Measuring range 200Ω, Earth resistance by 2- and 3-wire method
  Ground resistivity by the 4-wire method, Compensation for disturbance voltages, Compensation for test cables
• Measurement of step/contact voltage, Protection category CAT IV 50V
• Detection of disturbance currents on measurement
• LCD display, Backlight, Auto Power OFF
• Internal memory for measured data saving
• Optical/USB serial port for PC connection RS-232/USB
• Size (LxWx H) (mm) 230x115x103
• Weight in grams (batteries included) 30800
• Guidelines: CE MARK, EMC 2014/30/EU, EMC: IEC/EN61326
• EN50522, IEC/EN61010-1, LVD 2014/35/EU