Milwaukee MW605 MAX Dissolved Oxygen Meter

Milwaukee MW605 MAX Waterproof Galvanic Dissolved Oxygen Meter

Milwaukee MW605 MAX waterproof galvanic solution oxygen meter In this device, all measurements can be done automatically (ATC) or manually (MTC). It uses a galvanic probe reinforced with a permeable polytetrafluoroethylene membrane sensor and has a 10-foot probe cable for added flexibility during testing. The MW605 MAX oxygen meter has silver cathodes that must always be bright and clean to provide accurate and stable measurements.

Be careful not to scratch the thin membrane. Always use a plastic cap for protection. If cleaning is necessary, gently wipe it with a soft cloth and rinse the base with distilled water. If the membrane is placed in environments full of sediment, it is better to replace it every 6 to 8 months. Features and capabilities of the device:

• IP67 waterproof
• Automatic shutdown feature to increase battery life
• One or two percent of saturation calibration points at 100 percent
• Dedicated GLP key to store and recall data about system status
• Recording space up to 1000 records

Milwaukee MW605 MAX Waterproof Galvanic Dissolved Oxygen Meter Specifications

• O2 Accuracy: ±1.5% of reading ± 1 digit
• Temperature Accuracy: ± 0.4°C (±0.8°F)
• Calibration: One or Two % saturation calibration points 0 % (MA9070) and 100 % (water-saturated air)
• Temperature Compensation: Automatic, from 0.0 to 50.0°C (32.0 to 122.0 °F)
• Altitude compensation: -500 to 4,000 m (-1,640′ to 13,123′) with 100 m (328′) resolution
• Salinity Compensation: Manual, from 0 to 40 g/L ( with 1 g/L resolution)
• Logging/Memory: Max. 1,000 log records (stored in up to 100 lots) / On Demand, 200 logs / On Stability, 200 logs / Interval logging, 1,000 logs
• PC Connectivity: 1 micro USB port
• Battery Type: 3 x 1.5V alkaline AA (included)
• Battery Life: Approx. 200 hours of use
• Environment: 0 to 50°C / 32 to 122°F; max RH 95%
• Dimensions Meter: 8 x 3.3 x 2.0 inches (200 x 85 x 50 mm)