Mitech MH600 Leeb Hardness Tester

Based on the principle of Leeb hardness testing principle. Mitech MH600 can measure the Leeb hardness of all metallic materials.

One main unit can match to 6 impact devices Automatically identify the type without calibration

Automatically identify the state of impact devices(connect,disconnect,error ,etc.).

SKU:34867

MME Shopping Event

Hurry and get discounts on Most of MME Products up to 20%

Call for Price

18People watching this product now!

Mitech MH600 Leeb Hardness Tester

Product Overview

Metal hardness testing on-site is quick and simple with the Mitech MH600 portable Leeb hardness tester’s intuitive design. With color LCD display, it can also display clear testing results in dim light and strong sunlight environment, which greatly enhances the visual experience; specific multi-point calibration function for convert curve to reduce errors; it can automatically identify the measuring direction when testing, automatically alarm when out of range, to meet the inspection requirement; and IP65 protection, can effectively prevent oil, dust, and other corrosion in harsh field environments. Hardness conversion; two AA batteries used for minimal power consumption; multilingual support.

Function & application:
l Mold die cavity:

  • Bearings and various components
  • Pressure vessel, steam generator, and other equipment failure analyses
  • l Big labor item:
  • Installation of equipment and permanently assembled components.
  • l Testing a tiny hollow space’s surface:
  • For test findings, official original records are required.
  • l Material identification in the metallic materials warehouse:
  • Rapid testing for large-scale work pieces in several measuring locations and over a wide range.

Working Principle

The main idea is to apply an impact body of a specific weight to the testing surface while applying a specific test force, then measure the impacting and rebounding velocities of the impact body while the spherically shaped test tip is positioned 1mm above the testing surface, respectively.

The following is the calculating formula:

  • HL=1000×VB/ VA

Where:

  • HL—— Leeb hardness value.
  • VB—— Rebounding velocity of the impact body.
  • VA—— Impacting velocity of the impact body.

Working Conditions

  • l Working temperature:-10℃~+50℃;
  • l Storage temperature:-30℃~+60℃
  • l Relative humidity: ≤90%;

The surrounding environment should avoid of vibration, strong magnetic field, co

Mitech MH600 Leeb Hardness Tester features:

  • Model:MH600
  • Measuring range:(170~960)HLD
  • Resolution Accuracy:±6HLD
  • Communication storage:500 measurement series.(Relative to average times 32~1) USB
  • Working time:about 100 hours(with default brightness)
  • Main unit weight:230g
  • Dimensions:150*76*38mm
  • Package dimensions:36.5*29*12.5cm
  • Total weight:5.5kg

Mitech MH600 Leeb Hardness Tester specifications:

  • Measuring range: (170~960)HLD
  • Impact direction :vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify
  • Error: D,±6 HLD
  • Repeatability: D,6 HLD
  • Material: Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alu
  • Hardness: Scale HL、HB、HRB、HRC、HRA、HV、HS
  • Impact energe: D—-11mJ
  • Impact weight: D—-5.5g/7.2g
  • Impact ball hardness: 1600HV
  • Impact ball diameter: D—-3mm
  • Impact ball material: D—-Tungsten carbide
  • Sample surface roughness: D—-1.6μm;C—-0.4μm
  • Min depth of harness layer: D≥0.8mm;C≥0.2mm
  • Protective Level: IP65
  • Display: olor TFT,320×240 dots, dot-matric LCD
  • Storage: 500 measurement series.(Relative to average times 32~1)
  • Calibration Basic: (single-point) calibration and multi-point calibration function
  • Data printing: By connecting the PC to print
  • Power voltage: 3V,two AA size, alkaline batteries
  • Power supply: Two ordinary AA batteries
  • Power consumption: Low-power design
  • Standby period: About 100 hours(with default brightness)
  • Commumication port: USB1.1
  • Working language: Chinese-English converting
  • Shell material: ABS plastic seal design
  • Dimensions: 150mm×76mm×38mm
  • Weight: 5KG
  • PC software: Have
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Mitech MH600 Leeb Hardness Tester”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Brand

Mitech

MIT Make Intuitive Tech SA, better known as MITECH, acquired in January 2020 the operations of MIT Micro Informatique & Technologies SA, founded by three brothers who computerized the operations of their international commodity trading company in the early 1970s.

mitech-logo

Datasheet

Mme-Pdfs-Image

Specifications

Hardness Testers
Error And Repeatability

D,±6 HLD

Hardness (Range/Resolution/Accuracy)

(170~960)HLD

Hardness Scales

HL、HB、HRB、HRC、HRA、HV、HS

Impact direction

vertically downward, oblique, horizontal, oblique, vertical upward, automatically identify

Indenter Types

Tungsten carbide

pressure pump
material

Steel and cast steel,Cold work tool steel,Stainless steel,Grey cast iron,Nodular cast iron,Cast alu

Mechanical and General Specifications
Dimensions

150mm×76mm×38mm

Weight

5KG

IP rating

IP65

Power

3V,two AA size, alkaline batteries

Other features of the device

Commumication port: USB1.1, Display: olor TFT,320×240 dots, dot-matric LCD, Shell material: ABS plastic seal design, Working language: Chinese-English converting

Calibration

Basic (single-point) calibration and multi-point calibration function