Mitutoyo 500-712-20 Coolant Proof Caliper

Mitutoyo 500-712-20 Coolant Proof Caliper

product overview

The ergonomic Mitutoyo 500-712-20 coolant proof caliper provides consistent, accurate measurements of step, depth, and internal dimension. The caliper’s slide and jaws are composed of hardened stainless steel, and it has an easy-to-read, impact-resistant LCD display for steady, enduring functioning. The caliper may be used safely in workshop settings where coolant, water, dust, and oil are present.

function

1. Before taking a measurement, take careful to “zero” or reset the LCD reading.
2. Once “0” appears on the display, begin rotating the thumb until the object is firmly grasped by either the inner or outer jaws.
3. Use the outside (lower) and inner (upper) jaws to read the object’s outer and inner diameters, respectively.

Mitutoyo 500-712-20 Coolant Proof Caliper features:

• available with or without the ability to produce SPC
• For easier reading, the LCD display’s character height was extended from 7.4mm to 9.0mm.
• The newly created battery cover does not require a screwdriver to install it.
• When using a micrometer with an ABS linear scale, there is no need to reset the origin point every time the device is turned on, even if data was lost due to inadequate lighting while in use.
• Construction out of stainless steel keeps caliper parts safe and guarantees longer-lasting accuracy.

Mitutoyo 500-712-20 Coolant Proof Caliper specifications:

• Range: 0 – 150 mm
• Depth bar: flat
• Thumb roller: Yes
• Data output: Yes
• Max. Permissible Error E MPE: ±0,02 mm
• Max. Permissible Error S MPE: ±0,04 mm
• Digital step: 0,01 mm
• Max. response speed: Unlimited
• Display: LCD, character height 9 mm (150, 200 mm) 11 mm (300 mm)
• Delivered: In a case, including 1 SR-44 battery
• ORIGIN (ABS-Zero): Yes
• Auto Power OFF after 20 min. non use: Yes
• Low voltage alarm: Yes
• Battery life: Approx. 5 years under normal use
• Mass: 168 g
• Accuracy:±0.02mm