Epic Environmental Meter PCE-COG 10

Environmental Meter PCE-COG 10

PCE-COG 10 has a measuring range of 0 … 9999 ppm. In addition to measuring carbon dioxide, the air quality detector has a carbon monoxide (CO) sensor with a measuring range of 0…1000 ppm and a temperature and humidity sensor. The air quality measuring device already covers a wide range of measuring tasks. Therefore, the air quality detector is used, for example, in occupational safety to check the weather conditions at office workplaces.

During the measurement, the readings are stored in the humidity meter PCE-COG 10. Up to 5000, measuring points can be stored in the air quality measuring device. The air quality stores the CO² and CO content as well as the temperature and humidity. Detector for each bearing point. After a measurement run, the saved readings can be viewed directly on the air quality meter.

The readings recorded by the humidity meter can be transferred to a computer for further processing. The transfer takes place via the micro USB interface of the air quality measuring device. Connecting the CO and CO² measuring device to a computer is recognized as a mass data storage device. The measured values ​​are saved by the air quality measuring device in CSV file format and can be processed directly.

The built-in 1500 mAh battery in the humidity meter enables mobile use. To charge the battery, the air quality detector can be connected to a 5V DC power source via the micro USB interface. The air quality sensor can still be used for measurement during the charging process. There is a 1/4-inch connection on the back for optimal and longer-lasting measurement of the air quality meter. This connection allows the air quality detector to be mounted on a tripod. and aligned.

Environmental Meter PCE COG 10 Features

• Data memory for 5000 measuring points
• Measuring range (CO²) 0 … 9999 ppm
• Export of measurement data in CSV format
• Temperature and humidity measurement
• Additionally with a carbon monoxide sensor
•  Easy to read 2″ LC display

PCE COG 10 Features specifications:

• Carbon monoxide (CO) Measuring range 0 … 1000 ppm
• Carbon dioxide (CO²) Measuring range 0 … 9999 ppm
• Temperature Measuring Range 0 … 50 °C, 32 … 122 °F
• Humidity Measuring Range 0 … 100 % RH
• Display 2″ LC display
• Measuring rate 1 Hz
• Memory for 5000 measuring points
• Storage rate 1 minute, 15 minutes, 1 hour
• Units temperature: °C, °F, CO / CO²: ppm
• Alarm when limit values are exceeded visually and acoustically
• Data export CSV
• Connection 1/4“ tripod connection
• Interface Micro-USB for charging the battery and for data transmission
• Power supply (battery) 3.7 V, 1500 mAh
• Power supply (power adapter) primary: 100 … 240 VAC, 50 / 60 Hz, 0.25 A
• secondary: 5 VDC, 1 A
• Dimensions 54 x 215 x 34 mm / 2.1 x 8.4 x 1.3″
• Weight 154 g / 5.4 oz