Mitech MFD660C Ultrasonic Flaw Detector

Mitech MFD660C Ultrasonic Flaw Detector

Product Overview

Mitech spent years painstakingly developing the Mitech MFD660C intelligent digital ultrasonic defect detector, a premium product with several benefits including a distinctive design, superior production, easy operation, and potent function. Since its start, it has enjoyed the affection of its clients. It can quickly and reliably test, orient, analyze, and diagnose a variety of faults, including cracks, grease, and air holes in the inside of the workpiece.

Function & application

The device has a wide range of applications, including the detection and size of concealed cracks, voids, disbands, and other discontinuities in welds, forgings, billets, axles, shafts, tanks, pressure vessels, turbines, and structural elements.

Working Principle

1:When a flaw appears in a workpiece made of homogeneous material, the defect will reveal the interface between the defect and the workpiece’s other media. The pulsating ultrasonic wave will create reflection when it comes into contact with the interface because the acoustic resistance is different there. The probe will take in the energy that has been reflected.

2:The fault depth in the workpiece will then be represented by a reflection waveform at a specific abscissa point on the display screen. Different faults would result in varying heights and shapes of reflected waves, which would represent the characteristics of each defect.

Working Conditions

• Operating Temperature: -10℃ to 50℃;
• Storage Temperature：-30℃ to 50℃
• Avoid environments that vibrate, have a high magnetic field, are corrosive, or have a lot of dust.

Mitech MFD660C Ultrasonic Flaw Detector Features

• Mitech MFD660C can complete the complex run quickly and realize intelligent defect analysis.

• Mitech MFD660C can work more than 10 hours continuously.
• Mitech MFD660C waterproof.
• oil proof.
• dustproof.
• the function can achieve an IP65 protection level.
• Measuring range：0-9999 mm at steel velocity
• Resolution Accuracy：+/-0.1% FSW, Vertical: 0.2% FSH, Amplifi

Mitech MFD660C  Specifications

• Display Resolution: (640×480 pixels) full digital true color TFT LCD
• Blind Area: 5MM
• Flaw Sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
• Weld Figure Feature: Weld Figure feature can be enabled when detecting the weld parts using an angle transducer.
• Auto-Calibration: Automated calibration of transducer zero offsets and/or material velocity
• Memory: be able to store, and recall the A-Scan patterns and instrument settings.
• Flaw Locating: Live display Sound-path, Projection (surface distance), Depth, Amplitude
• Defect Quantification: directly display the result with db unit
• Defect characterization: calculate the equivalent size of the flaw easily and quickly to facilitate the judgment of artificial
• Curved Surface Correction: used to measure the surface distance and depth of defect on a curved surface
• DAC/AVG: Y
• AWS D1.1: one of the AWS（American Welding Society） standards
• Crack Height Measuring: measure and display the height of a crack found inside the workpiece
• Magnify Gate: spreading of the gate range over the entire screen width
• Video Recording: more than 100 hours
• A Scan Freeze: Display freeze holds waveform and sound path data
• Coded Echo Color: locate the flaw position
• B-Scan: display a graphical cross-section of the workpiece
• Power-Saving Method: low power consumption
• Protection Level: IP54
• Communication Interface: High Speed USB2.0 port
• DataPro Software: Y
• Working Language: freely switch between Chinese and English
• Total Weight: 6.0KG
• Measuring Range: (0 ~ 9999) mm in steel
• Bandwidth: 0.5 to 15MHz automatic matching according to the probe frequency
• Material Velocity: (100 ~ 20000) m / s
• Dynamic Range: ≥ 36dB
• Vertical Linear Deviation: ≤ 2.0%
• Horizontal Linear Deviation: ≤ 0.1%
• Resolution: > 40dB (5P14)
• Sensitivity Leavings; 62dB (flat-bottomed deep hole 200mmФ2)
• Rejection: (0 to 80)% Linear without affecting the linearity and gain
• Noise Level: ≤ 8%
• Probe Type: straight beam probe, angle beam probe, dual element probe, through-transmit probe
• Gates: Wave-getting Gate, Wave-losing Gate, Single Gate Reading, Dual Gate
• Alarm: Beep Alarm and LED light Alarm
• Power Supply: DC 9V
• Working Time: ＞10 hours
• Overall Dimensions: 280 × 220 × 70(mm)
• Operating Temperature: (-10 ~ 50) ℃
• Relative Humidity: (20 ~ 95)% RH
• Pulse Energy: 200V, 300V, 400V, 500V selectable, suitable for various probe
• Pulse Width: (30～510)ns range with continuous adjustment to match the different frequency probes
• Probe Damping: 200Ω、500Ωs selectable to meet different requirements for resolution and sensitivity.
• Sampling: 10 digits AD Converter at the sampling speed of 200MHz, the waveform of high fidelity.
• Rectification: Positive half wave, negative half wave, full wave, RF
• Gate Reading: optional for single gate and double gate reading mode, both peak and edge can trigger it
• Gain: 0 dB to 110 dB adjustable in selectable steps 0.1 dB, 1 dB, 2dB, and 6dB
• Transducer Connections: BNC or LEMO