DAKOTA ULTRASONICS MMX-7 THICKNESS

DAKOTA ULTRASONICS MMX-7 THICKNESS SOUND SOLUTIONS

The DAKOTA ULTRASONICS MMX-7 THICKNESS v2.0 has all the features of the ZX meters with some additional features and benefits. Selectable B-scan and large digit display options, 4GB internal SD memory, alphanumeric data storage format, user-definable 64-user custom configurations, transducer list for improved linearity, one-touch echo color for echo, multiple calibrations and selectable type options, etc…

 Our Java-based DakView software for PC or MAC OSX and USB-C connectivity make it a complete package! Buy the DAKOTA ULTRASONICS MMX-7 THICKNESS device with all the features of the ZX  series and additional benefits from MME at the best possible price.

DAKOTA ULTRASONICS MMX-7 THICKNESS FEATURES

• Setups: 64 custom user-definable setups; factory setups can also be edited by the user.
• Factory setups can also be edited by the user.
• Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
• Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
• Scan Mode: This takes 250 readings per second and displays the minimum reading found when the transducer is removed.

DAKOTA ULTRASONICS MMX-7 THICKNESS SPECIFICATION

• Weight: 13.5 ounces (with batteries)., Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
• Operating Temperature: -14° to 140°F (-10° to 60°C).
• Keyboard: Membrane switch with twelve tactile keys.
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Display: 1/8 in. VGA grayscale display (240 x 160 pixels); Viewable area 2.4 x 1.8 in. (62 x 45.7mm). EL
• backlit (on/off/auto/invert).
• Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) measures from 0.025 in. to 100 ft. (0.63 mm to 30.48 Meters).
• Echo-Echo Mode (E-E): Thru Paint & Coatings) measures from 0.100 to 6.0 in. (2.54 to 152.4 mm).
• The range will vary +/- depending on the thickness of the coating.
• Resolution: +/- .001 inches (0.01 mm)
• Velocity Range: .0122 to .7300 in./ms 309.88 to 18542 meters/sec
• Single and Two point calibration options, or selection of basic material types.
• Units: English & Metric
• Transducer Types: Dual Element (1 to 10 MHz).
• Locking quick disconnect “00” LEMO connectors.
• Standard 4-foot cable.
• Custom transducers and cable lengths are available for special applications.
• Measurement Modes: Pulse-Echo (flaws, pits)
• Echo-Echo (thru-paint).
• Pulser: 150 volt square wave pulser.
• Receiver: Manual or AGC gain control with a 50dB range, depending on the mode selected.
• Timing: Precision TCXO timing with single shot 100MHz 8-bit ultra low power digitizer.
• Display Views: Large Digits: standard thickness view; Digit Height: 0.700 in (17.78mm).
• B-Scan: Cross-section view. Display speed variable (10 to 200 readings per second).
• Scan Bar: Speed 10Hz. Viewable in B-Scan and Large Digit views.
• Bar Graph: Indicates stability of measurement. Viewable in B-Scan and Large Digit views.
• Line Power: USB-C to PC or power outlet.
• Batteries: Three AAA cells. Alkaline – 35 hrs, Nicad – 10 hrs and NI-MH – 35 hrs.
• Auto power off if idle for 5 min.
• Battery status icon.
• Factory calibration: traceable to NIST & MIL STD- 45662A.
• Data Structure: Grid (alpha numeric).
• Screen Capture: Bitmap graphic capture for quick documentation (.tif).
• OBSTRUCT to indicate inaccessible locations.
• Capacity: 4 GB internal SD card.
• Data Output: USB-C 1.1 to PC & OSX connectivity.
• 2 year limited