Name: Buy HIOKI IM3570 Impedance Analyzer
Brand: Hioki
SKU: 6223
Rating: 5.00 (1 reviews)

HIOKI IM3570 Impedance Analyzer

The HIOKI IM3570 Impedance Analyzer is a cutting-edge gadget developed for precise and thorough impedance analysis in a wide range of electrical and electronic applications.

The im3570 hioki has a plethora of advanced capabilities that make it an effective tool for impedance analysis. This impedance analyzer provides extensive insights into the behaviour of electronic components and circuits due to its excellent accuracy, wide frequency range, and many measurement parameters. The IM3570 is equipped with intuitive software and a user-friendly interface to enable simple operation and efficient data interpretation. Its small size, sturdy construction, and swift measuring speed increase productivity in both laboratory and field settings.

hioki impedance analyzer are used to characterise and evaluate the electrical properties of various components such as resistors, capacitors, and inductors. Engineers and researchers can use them to evaluate factors like impedance, phase angle, and admittance, which provides essential information for design, testing, and quality control. As a high-quality impedance analyzer, the HIOKI IM3570 provides precise and dependable measurements for a wide range of applications in industries such as electronics, telecommunications, and automotive.

HIOKI IM3570 Specifications:

Measurement modes: LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode
Measurement parameters: Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
Measurement range: 100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z)
Basic accuracy: Z ±0.08% rdg. θ: ±0.05°
Measurement frequency:4 Hz to 5 MHz (5 digits setting resolution, minimum resolution 10 mHz)
Output impedance: Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω
Display:5.7-inch color TFT, the display can be set to ON/OFF
Measurement time: 0.5 ms (100 kHz, FAST, display OFF, representative value)
Functions: DC bias measurement, Comparator, BIN measurement (classification)
Power supply: 90 to 264 V AC, 50/60 Hz, 150 VA max.
Accessories: Power cord × 1, Instruction manual × 1, PC communication instruction manual (CD-R) × 1

Rated 5 out of 5

1 review

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

1 review for HIOKI IM3570 Impedance Analyzer

Clear filters

Helen – July 4, 2022

Rated 5 out of 5
It is very high quality and excellent

0

0

Add a review

You must be logged in to post a review.

DATA sheet

–

Specifications

Technical Specifications

Measurement Modes	LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode
Measurement Parameters	Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
Measurement Range	100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z)
Display Range	Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp: ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only θ: ±(0.000° to 180.000°), D: ±(0.000000 to 9.999999) Q: ±(0.00 to 99999.99), Δ%: ±(0.0000% to 999.9999%)
Basic Accuracy	Z ±0.08% rdg. θ: ±0.05°
Measurement Frequency	4 Hz to 5 MHz (5 digits setting resolution, minimum resolution 10 mHz)
Measurement Signal Level	Normal mode: V mode/CV mode: 5 mV to 5 Vrms (up to 1 MHz) 10 mV to 1 Vrms (1.0001 MHz to 5 MHz), 1 mVrms steps CC mode: 10 μA to 50 mArms (up to 1 MHz) 10 μA to 10 mArms (1.0001 MHz to 5 MHz), 10 μArms steps Low impedance high accuracy mode: V mode/CV mode: 5 mV to 1 Vrms (up to 100 kHz), 1 mVrms steps CC mode:10 μA to 100 mArms (100 mΩ and 1Ω ranges of up to 100 kHz), 10 μArms steps
Output Impedance	Normal mode: 100 Ω, Low impedance high accuracy mode: 10 Ω
Display	5.7-inch color TFT, display can be set to ON/OFF
Measurement Time	0.5 ms (100 kHz, FAST, display OFF, representative value)
Functions	DC bias measurement, Comparator, BIN measurement (classification), Panel loading/saving, Memory function
Interfaces	EXT I/O (handler), RS-232C, GP-IB, USB communication, USB memory, LAN
Power Supply	90 to 264 V AC, 50/60 Hz, 150 VA max.
Dimensions and Mass	330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz)
Included Accessories	Power cord × 1, Instruction manual × 1, PC communication instruction manual (CD-R) × 1

HIOKI IM3570 Impedance Analyzer