Kimo Macroevtest Electric Vehicle Charging

Kimo Macroevtest electric vehicle charging

KIMO MACROEVTEST  electric vehicle charging is a new HT device for verification and safety control of Electric Vehicle Charging Stations (EVSE) according to IEC/EN 61851-1 and IEC/EN60364-7-722 standards. As a combined test device, MACROEVTEST also carries out tests of electrical systems according to IEC/EN 61557-1, i. H. Measurements of protective conductor continuity, insulation resistance (with PI and DAR calculation), total earth resistance, type RCD B, A, and CA.
tripping time and current, line/fault impedance with the calculation of fault current/fault perspective, phase sequence, and compliance. To buy KIMO MACROEVTEST checking electric vehicle charging at the best price, visit the MME website.

Kimo Macroevtest electric vehicle charging  FEATURES

• EVSE AUTOMATIC SAFETY TEST, Output Voltage Value Check
• Protective Conductor Continuity Check, Insulation Resistance Measurement
• Status Check: Ready (Status A), Vehicle Detected (Status B),  Mechanical Interlock Control (State B)
• Ready (Load) (State C) Vented (State D),  PE Fault Simulation (PE Fault),  CP Signal Fault (E Fault)

Kimo Macroevtest Specifications:

• The sequence of tests for the verification of electric columns with EV-TEST100 adapter, TRMS
• Insulation with test voltages 100, 250, 500, and 1000VDC, Continuity of protective conductors with 200mA
• Tripping time and current of RCDs type B, A, AC Standard, Selective, and Delayed up to 1A
• Tripping time and current of RCDs with separate clamp jaws type B, A, AC Standard, Selective, and Delayed up to 10A With optional accessory RCDX10, Non-trip earth resistance
• Earth resistance by voltammetric method, Resistance of the single earth rods with clamp With optional accessory T2100, Ground resistivity by the 4-wire method
• Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE With optional accessory IMP57
• Measurement of percentage voltage drop on the line, AUTO test (Non-trip ground resistance, RCD, Insulation) in sequence, Contact voltage, Phase sequence, and Leakage current with the optional clamp meter
• Measurement of Voltage, Current, Active, Reactive, Apparent Power (1), Measurement of Cosphi, Power Factor (1), Voltage and current harmonics up to the 25th and THD% 25ª, Protection category CAT IV 300V
• Measurement of environmental parameters (°C,°F, %RH, Lux), Test with remote lead PR400, Help online on the display, Internal memory for measured data saving, Optical/USB serial port for PC connection
• Integrated WiFi connection and compatibility with HTANALYSIS App
• Size (LxWx H) (mm) 225 x 165 x 75mm, Weight in grams (batteries included) 1.2kg
• Functions Guidelines: 17th edition, CEI 64-8, CEI 64-8 612.2, CEI 64-8 612.3 .4 .5, CEI 64-8 612.6.1, CEI 64-8 612.6.2,  CEI 64-8 612.6.3,  CE MARK, DPR 462 del 22/10/2001, EMC 2014/30/EU,
• EMC: IEC/EN61326, EN50522, EN61008, IEC/EN6090-0, IEC/EN61010-1, IEC/EN61557-1, IEC/EN61557-2, IEC/EN61557-3, IEC/EN61557-4
• IEC/EN61557-5, IEC/EN61557-6, IEC/EN61557-7, LVD 2014/35/EU, UNE20460 , VDE 0100