Kyoritsu Clamp Sensors/Adaptors KEW 8115

Kyoritsu Clamp Sensors/Adaptors KEW 8115

Use this Clamp Sensor to extend the AC and DC current range of almost any digital multimeter without breaking the circuit under test. Using the KEW8115 with a KEW1051/1052 (DMM) the display can be set for direct reading in A.

Kyoritsu Clamp Sensors/Adaptors KEW 8115 specifications:

• Measuring Range: AC: 0.1 to 130Arms (185Apeak) , DC: 0 to ±180A
• Output Voltage: AC: 10mV/A, DC: 10mV/A
• Accuracy: ±1.2%rdg±0.4mV (50/60Hz)
  ±2.5%rdg±0.4mV (40 to 1kHz)
• Low Battery Warning: 2.2V±0.2V or less – Red LED flash
  (1.9V±0.2V – Automatically power off)
• Conductor Size: Max. Φ12mm
• Withstand Voltage: 3540V AC (RMS 50/60Hz) for 5 sec.
• Operating Temperature & Humidity Range: -10 to 55°C, relative humidity 85% or less (no condensation)
• Output Impedance: Approx. 10Ω or less
• Applicable Standards: IEC 61010-1 CAT III 300V Pollution degree 2
  IEC 61010-2-032, IEC 61326-1
• Power Source:3V DC (size AAA alkaline battery LR03x2pcs)
  Continuous use: approx. 40 hours
  (Auto power off approx. 20 minutes)