Description

CEM DT-6505F Insulation Tester

The CEM DT-6505F insulation tester is an enhanced model tailored for comprehensive insulation resistance testing in electrical systems. This model is built to assess the integrity of insulation in wires, cables, transformers, and electrical panels, helping to prevent electrical failures and ensure safety.

Like the standard DT-6505, the DT-6505F likely supports a range of testing voltages, possibly including higher or more precise voltage settings to accommodate specific industry requirements. It could offer advanced features such as a more extensive data storage capacity, Bluetooth connectivity for wireless data transfer, or a more rugged design for field use.

CEM DT-6505F Key Features

Rugged, utility hard case
Auto power off to save battery power
True-RMS
Data logged
Low pass fi lter for accurate measurement of variable frequency drive (VFD) signals
CAT III 1000V, CAT IV 600V measurement category
Bluetooth interface
Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio
Slim probes designed with test button
200 mA Continuity & Low Ohm range measurement
Compare function (pass/fail) for fast repeatitive tests
Insulation test voltages 125V, 250V, 500V, 1000V
Insulation test: 0.001MΩ to 5000MΩ
Auto discharge of voltage test signal
Insulation test smoothing reading
K-type thermocouple
AC 3000A Current test

CEM DT-6505F Specifications

Multimeter										6505	6505F
Multimeter			Max Range			Max Resolution			Basic Accuracy
DC Voltage			1000V			0.1V			±(0.1% + 4)	*	*
AC Voltage			1000V			0.1V			±(1.0% + 5)	*	*
Low Z AC Voltage			600V			1mV			±(3.0% + 40)
AC+DC Voltage			1000V			0.1V			±(3.0% + 40)
DC Current			10A			0.001A			±(1.0% + 3)	*	*
AC Current			10A			0.001A			±(1.5% + 3)	*	*
AC 3000A Current			3000A			0.01A			±(3.0% + 3)		*
Resistance			50MΩ			0.01Ω			±(1.0% + 4)	*	*
Capacitance			5000µF			0.1µF			±(3.5% + 10)	*	*
Frequency			50MHz			0.001MHz			±(0.1% + 1)	*	*
Duty Cycle			0.1 to 99.90%			0.01%			±(1.0% + 2)	*	*
Temperature			-50 to 1200°C -58 to 2192°F			0.1°C 0.1°F			±(1.0% + 2.5°C) ±(1.0% + 4.5°F)	*	*
Insulation Tester
Terminal Voltage		Range			Max Resolution			Accuracy	Test Current
125V(0% ~10%)		0.125~5000MΩ			0.001MΩ			±(2%+10)	1mA @load125kΩ	*	*
250V(0% ~10%)		0.250~5000MΩ			0.001MΩ			±(2%+10)	1mA @load250kΩ	*	*
500V(0% ~10%)		0.500~5000MΩ			0.001MΩ			±(2%+10)	1mA @load1500kΩ	*	*
1000V(0% ~0%)		1.000~5000MΩ			0.001MΩ			±(2%+10)	1mA @load1MΩ	*	*
Low Ohm Meter
	Range			Resolution			Accuracy		Max. open Circuit Voltage
Resistance	0.000~5.000Ω			0.001Ω			±(1.5% + 30)		5 ±1V	*	*
	5.00~50.00Ω			0.01Ω			±(1.5% + 3)		5 ±1V	*	*
	50.0 ~500.0Ω			0.1Ω			±(1.5% + 3)		5 ±1V	*	*
	500 ~2000Ω			1Ω			±(1.5% + 5)		5 ±1V	*	*

Datasheet

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Be the first to review “CEM DT-6505F Insulation Tester”

You must be logged in to post a review.

CEM DT-6505F Insulation Tester