Kyoritsu KEW 2062BT Clamp Power Meter

Kyoritsu Clamp Power Meter Kyoritsu KEW 2062BT

KEW 2062BT can perform Single-phase 2-Wire / Single-pahe 3-Wire and balance and unbalance measurements of Three-phase 3-Wire / Three-phase 4 Wire. The double display can simultaneously show many parameters like W & PF, W & deg, W & VA, W & Var, V & A, etc.

At MMElectronics, we strive to provide exceptional customer service. Our expert team is ready to assist you in selecting the clamp meter for your application.For more details contact our experts.

Kyoritsu Clamp Power Meter KEW 2062BT Specifications:

Wiring connections :

• Measurements and parameters:Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor(cosθ), Phase angle, Harmonics(THD-R/THD-F), Phase rotation

ACV:

• Range:1000V
• Accuracy:±0.7%rdg±3dgt (40.0 – 70.0Hz),±3.0%rdg±5dgt (70.1 – 1kHz)
• Crest factor:1.7 or less

ACA:

• Range:40.00/400.0/1000A (3 range auto)
• Accuracy:±1.0％rdg±3dgt (40.0 – 70.0Hz),±2.0％rdg±5dgt (70.1 – 1kHz)
• Crest factor:3 or less on 40.00A/400.0A range, 3 or less 1500A peak on 1000A range

Frequency:

• Display Range:40.0 – 999.9Hz
• Accuracy:±0.3％rdg±3dgt

Active power:

• Range:40.00/400.0/1000kW
• Accuracy:±1.7%rdg±5dgt (PF1, sine wave, 45-65Hz)

Apparent power:

• Range:40.00/400.0/1000kVA
• Accuracy: ±1dgt against each calculated value ,Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt

Power factor:

• Display Range:-1.000 – 0.000 – +1.000
• Accuracy:±1dgt against each calculated value ,Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt

Phase angle (1P2W only):

• Display Range:-180.0 – 0.0 – +179.9
• Accuracy:±3.0°
• Harmonics RMS(Content rate):
• Analysis order:1st – 30th order
• Accuracy:±5.0％rdg ± 10dgt (1 – 10th),±10％rdg ± 10dgt (11 – 20th),±20％rdg ± 10dgt (21 – 30th)
• Total harmonics THD-R/THD-F :
• Display Range:0.0% – 100.0%
• Accuracy:±1dgt against the calculated results of each measured value
• Phase rotation:ACV 80 – 1100V (45 – 65Hz)
• Other functions:MAX/MIN/AVG/PEAK, Data hold, BluetoothⓇ, Back light, Auto power off

General:

• Communication interface:Bluetooth®5.0 Android™5.0 or more, iOS 10.0 or more
• Power source:LR6(AAA)(1.5V) ×2
• Continuous measuring time:Approx. 58 hours
• Conductor size:φ55mm max.
• Dimensions / Weight:247(L) × 105(W) × 49(D) mm / Approx.490g(including batteries)
• Applicable Standards:IEC 61010-1, IEC 61010-2-032, IEC 61326-1,-2-2 (EMC), IEC 60529(IP40),CAT IV 300V / CAT lll 600V / CAT ll 1000V Pollution degree 2
• Accessories:7290 (Voltage test lead set),9198 (Carrying case),LR6(AAA)×2, Instruction