KIMO COMBI 420 Multifunction Installation

COMBI 420 – 17th Edition Multifunction Installation

KIMO COMBI 420 Multifunction Installation is an innovative device for testing electrical systems according to VDE 0100, for measuring and storing environmental parameters (brightness, temperature, noise level), short-circuit currents and electrical parameters, active power, harmonics (harmonics), etc. up to the phase systems.

It is an extremely easy-to-use device that offers a comprehensive range of functions via a convenient multilingual menu. Among other things, it is possible to start measurements with an external probe. accessories (PR 400) are available as an option, which makes it much easier to carry out several measurements in a row. To buy with confidence KIMO COMBI 420 Multifunction Installation with the best quality and the lowest price, visit our experts.

KIMO COMBI 420  Installation FEATURES

• COMBI420 tests according to all local regulations (Issue 17) and provides test results for the full documentation.
• It measures total earth resistance, and checks A and AC differences up to 1A rated current, insulation up to 1000V, continuity up to 200mA, and short-circuit currents.
• enables measurement and recording of environmental parameters (illuminance, temperature) and
  scattering and electrical quantities, power harmonics, and power factors in single-phase networks.
•  provides the ability to control the order of phases with a single wire.
• The internal memory allows measurements to be saved for later transfer to a PC via a serial connection.
• The device is equipped with the innovative AUTO function: when you select this function and only set the RCD current value, the COMBI420 connected to the mains socket performs total earthing resistance, RCD, and insulation tests one after the other.

KIMO COMBI 420 SPECIFICATIONS

• Low ohm measurement with> 200 mA DC (VDE 0413 Part 4, EN 61557-4)
• Insulation test with 50, 100, 250, 500, or 1000 V DC (VDE 0413 Part 2, EN61557-2), Complete FI/RCD testing and analysis function (VDE 0413 Part 6, EN 61557-6), Loop and line impedance measurement (VDE 0413 Part 3, EN 61557-3), Display of the short-circuit current ik (VDE 0413 Part 3, EN 61557-3)
• Loop impedance measurement without tripping the RCD, Measuring the direction of the rotating field (VDE 0413 Part 7, EN 61557-7)
• Connection for external probe tip with remote control (start/stop function), Connection for external clamp-on ammeter from 1 mA (e.g. HT 96U), Connection for external measuring probes for humidity, temperature, and light intensity measurement (Lux)
• Performance measurement, active, reactive, and apparent power, power factor., Harmonics analysis of voltage and current up to 49. Harmonics and THD in %, Integrated optical interface on USB
• Internal measured value memory for 600 measured values, Auto switch-off, Built-in protective rubber holster, Online connection help via display
• Guidelines: 17th edition, CEI 64-8, CEI 64-8 612.2, CEI 64-8 612.3 .4 .5, CEI 64-8 612.6.1, CEI 64-8 612.6.2
• CEI 64-8 612.6.3, CE MARK, DPR 462 del 22/10/2001, EMC 2014/30/EU, EMC: IEC/EN61326
• IEC/EN61010-032, IEC/EN61010-1, IEC/EN61557-1, IEC/EN61557-2, IEC/EN61557-3, IEC/EN61557-4
• IEC/EN61557-6, IEC/EN61557-7, LVD 2014/35/EU, UNE20460, VDE 0100