PCE-ADL 11 Anemometer

PCE-ADL 11 Anemometer

PCE-ADL11 anemometer is a practical device for measuring wind speed, it is configured with the relevant software on the device and there are multiple settings for measurement.
PCE-ADL11 anemometer has various parameters in measurement: m/s, mph, knots, km/h, ft/min. You can also set the measurement intervals on the device software.

The data logger function holds 60,000 measured values. “The information collected by the device” can be read through the software on the computer. The results can be seen graphically, “or in” curves and tables.
A propeller is installed on the anemometer “which” reacts “even” to low flow speed. The PCE-ADL11 anemometer can “also” be installed and used in a fixed “position”. For this purpose, there is a threaded hole at the bottom of the anemometer “with which” the device can be firmly installed on the bracket.
Our colleagues at MME are at your service to get this device to you at the lowest price and in the shortest time.

Anemometer PCE-ADL 11 key feature :

• Threaded hole on the device
• Configuration via the software
• Easy to use
• Direct-reacting, smooth-running impeller
• Various measuring units selectable
• Evaluation on the PC (graphic representation)
• Alarm when limit value exceeded
• Measurement memory for up to 60,000 values

Anemometer PCE-ADL 11 Specification :

• Measuring ranges : 1.2 … 30.0 m / sec.
  4.3 … 108.0 km / h
  2.33 … 58.32 knots
  2.69 … 67.2 miles / h
  236 … 5906 ft / min
• Resolution : 0.01 m / s
  0.1 km / h
  0.1 knot
  0.1 mph
  1 ft / min
• Storage :  For up to 60000 readings
• Data Interface : USB for data transmission
• PC software : For data evaluation with graphical            representation