PCE-EVSE 310 Plus Electric Vehicle EVSE Tester
Short Description:
Discover the best prices for PCE-EVSE 310 Plus in Dubai, UAE. Buy now and experience superior performance!
Product purchase
AED 1,705 (excl.VAT)
16
People watching this product now!
Terms of sending goods ›
PCE-EVSE 310 + Electric Vehicle EVSE Tester
The PCE-EVSE 310 Plus Electric Vehicle EVSE Tester is a device designed to test and verify the functionality of electric vehicle charging stations, specifically for charging mode 3 installations. It is compatible with standard VDE 0100 testers like the PCE-ITE 55B installation tester, and it can be used to check for installation errors thanks to its phase voltage detection capabilities via LEDs.
The PP State rotary switch on the EVSE tester allows for the simulation of different charging cable capacities by using various resistors connected between the Proximity Pilot (PP) and Protective Earth (PE) conductors. Additionally, the CP State rotary switch enables the simulation of different vehicle charging states by altering the resistors between the Control Pilot (CP) and PE conductors. This setup helps in testing and verifying the functionality of electric vehicle charging stations by mimicking different operational scenarios.
PCE-EVSE 310 Plus Key Features
- PE pre-test
- Status of the Proximity Pilot PP and the Control Pilot CP
- Simulation of CP fault “E” and PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
- incl. adapter to type 1
- incl. type 2 plug
PCE-EVSE 310 Plus Specifications
| Test Functions | |
| PE pre-test | yes, with capacitive electrode |
| PP Simulation | open, 13 A, 20 A, 32 A, 63 A |
| CP Status | A, B, C, D |
| CP error “E” | E |
| PE fault / earth fault | Yes |
| General technical data | |
| Connections | L1, L2, L3, N, PE |
| Connections Additional information | max. 230V (1-phase) / 430V (3-phase) ; 50 / 60Hz 10A / 250 V Type 2 plug fixed to the cable (optional adapter required for type 1) |
| Standard(s) | IEC62196-2 Type 2 connector |
| Cable length | 25 cm |
| Safety standard | CAT II / 300V |
| Power socket | max. 250 V; 50/60 Hz; 10 A |
| Outputs | 2 x 4mm sockets (signal output terminals) |
| Fuse(s) | Power socket T10A/250V |
| Protection class (device) | IP40 |
| Weight | 643 g |
| Dimensions (L x W x H) | 600 x 105 x 73 mm |
| Operating conditions | 0 … 40 °C , 80 % r.H. |
| Storage conditions | -10 … 50 °C , 80 % r.F |
| Languages of instructions | German, English |
You must be logged in to post a review.
Related Products
Bench Multimeters
Reviews
Clear filtersThere are no reviews yet.