Fluke TL40 Retractable Tip Test Lead Set UAE

Description

Fluke TL40 Retractable Tip Test Lead Set Overview

The Fluke TL40 is a pair of red and black test leads with retractable needle point tips. You can set the exposed tip to any length from 0 to 76 mm, so you can reach recessed terminals, connector pins and deep test points without exposing more metal than you need.

The tips are extra hard for a long service life, and the leads use flexible silicone insulation. The set is rated CAT II 600 V, 3 A.

Key Features

Adjustable tip length from 0 to 76 mm
Sharp, extra-hard needle tips for good contact and long life
Flexible silicone insulated leads
CAT II 600 V, 3 A safety rating
Red and black pair; one-year Fluke warranty

Fluke TL40 Specifications

Fluke TL40 official specifications
Contents	1 pair of test leads (red and black)
Probe tips	Sharp needle point tips, extra hard for long service life
Tip length	Adjustable from 0 to 76 mm (retractable)
Lead insulation	Flexible silicone
Safety rating	CAT II 600 V, 3 A
Fluke part number	1590606
Warranty	1 year (Fluke)

Compatible Fluke Meters

Fluke lists the TL40 as compatible with the Fluke 87V, Fluke 83V, Fluke 287, Fluke 289, Fluke 88V/A, Fluke 787, Fluke 787B and Fluke 789, and with the Fluke 707Ex and 712 calibrators.

TL40 vs Other Fluke Probes

Fluke test lead and probe comparison
Fluke TL40	Retractable needle tips, 0 to 76 mm; CAT II 600 V, 3 A
Fluke TL910	1 mm fine tips up to 100 mm, gold and stainless tips; CAT II 1000 V, 3 A
Fluke TL71	Premium general-purpose test lead set for everyday electrical work

For very fine PCB work, see the Fluke TL910 electronic test probes. For general electrical work, see the Fluke TL71 premium test leads. You can also add Fluke TP38 slim reach probes, Fluke TL940 mini-hook test leads or Fluke AC175 alligator clips, or get a full kit such as the Fluke TLK287 electronic master test lead set.

Typical Applications

Recessed terminals and tight connector pins
Control panels and terminal strips
Electronics and appliance repair
Back-probing connectors in instrumentation work

Safety Tip

Your measurement setup is only as safe as its lowest-rated part. The TL40 is rated CAT II 600 V, so use leads rated CAT III or CAT IV for distribution boards and service entrances. Learn more in our guide to electrical safety standards and CAT ratings.

Need help choosing the right model or a quotation? Message our team on WhatsApp or use the quote button on this page.

Browse more electrical test accessories, digital multimeters or Fluke products.

Fluke TL40 FAQ

What is special about the Fluke TL40 test leads?

The needle tips retract and extend. You can set the exposed tip anywhere from 0 to 76 mm, so you can reach deep or tight test points while keeping the rest of the tip covered.

What is the safety rating of the Fluke TL40?

Fluke rates the TL40 at CAT II 600 V, 3 A. Use it on CAT II circuits such as outlets and plug-in equipment, and choose CAT III/CAT IV leads for distribution panels and service entrances.

Which meters work with the TL40?

Fluke lists it as compatible with the 87V, 83V, 287, 289, 88V/A, 787, 787B and 789 meters, and with the 707Ex and 712 calibrators.

Are the TL40 leads flexible?

Yes. The leads are insulated with flexible silicone, which stays supple and easy to route around equipment.

How do I keep the tip from sliding back in?

Set the tip to the length you need and tighten the adjustment knob before probing. If the knob is loose, the tip can push back into the probe body.

What warranty does Fluke give on the TL40?

Fluke gives a one-year warranty on the TL40.

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Fluke TL40 Retractable Tip Test Lead Set”

You must be logged in to post a review.