MOHAMMAD MAHDI Electronics Trading LLC
Call for price
The Kyoritsu KEW 8125 is a load current clamp sensor that measures AC current up to 500 A on conductors up to 40 mm and outputs a proportional 1 mV/A signal to compatible Kyoritsu power meters and analyzers such as the KEW 6305 and 6315.
Call for price
The Kyoritsu KEW 8127 is a high-accuracy load current clamp sensor with a Ø24 mm jaw, rated 100 A AC with a 5 mV/A output (500 mV/100 A) and ±0.5% accuracy. Designed for use with the KEW 5010/5020 loggers, it has low phase shift, a 3 m cable and a mini-DIN 6-pin connector, rated CAT III 300 V.
Call for price
The Kyoritsu KEW 8128 is a high-sensitivity load current clamp sensor with a Ø24 mm jaw, rated 5 A AC (max 50 A) with a 10 mV/A output and ±0.5% accuracy. Its low phase shift and high resolution make it ideal for small-current measurement with Kyoritsu loggers, with a 3 m cable and mini-DIN 6-pin connector, rated CAT III 300 V.
Call for price
The Kyoritsu 8130 is a flexible, lightweight AC current sensor using an air-core (Rogowski) coil to measure up to 1000 A AC around conductors of up to 110 mm diameter. Rated CAT IV 300 V / CAT III 600 V, it outputs 500 mV at 1000 A via a 3 m cable and mini-DIN connector for use with compatible Kyoritsu power meters and analysers.
Call for price
The Kyoritsu 8133 is a large flexible AC current sensor that measures up to 3000 A AC around conductors of up to 170 mm diameter using an air-core (Rogowski) coil. Rated CAT IV 300 V / CAT III 600 V, it outputs 500 mV at 3000 A over a 3 m cable and mini-DIN connector for use with compatible Kyoritsu power meters and power-quality analysers.
Call for price
The Kyoritsu 8135 is a flexible low-current AC sensor ideal for measuring small currents down to a few amps, rated up to 50 A AC around conductors of up to 75 mm diameter. Using an air-core (Rogowski) coil it outputs 500 mV at 50 A (10 mV/A) over a 3 m cable and mini-DIN connector, rated CAT IV 300 V / CAT III 600 V for compatible Kyoritsu instruments.
Call for price
The Kyoritsu KEW 5711 is a non-contact AC voltage detector that senses voltage from 20 V to 1000 V through insulation, warning with a buzzer, a glowing tip and an LED. It has dual Hi/Lo sensitivity, a powerful flashlight and is ready to use without powering on, rated CAT IV 600 V / CAT III 1000 V for safe live-wire checks.
Call for price
The Kyoritsu KEW 5515 is a non-contact infrared thermometer measuring -32 to 535 °C with 0.1 °C resolution and ±3.0 °C accuracy, using a single laser for accurate aiming. A dual illuminated display shows the reading plus MAX/MIN/AVG or a K-type thermocouple value, with settable high/low alarm limits — a versatile tool for maintenance and diagnostics.
Call for price
The Kyoritsu KEW 5202 is a digital light/lux meter with a separate cabled sensor, measuring illuminance from 0.1 to 19990 lux across three ranges, with data hold, MAX/MIN, backlight and Bluetooth data transfer, for checking lighting levels in workplaces and installations.
Call for price
The Kyoritsu KEW 5204 is a versatile digital light meter measuring illuminance from 0 to 199,900 lx with 0.1 lx resolution via a detachable, rotatable silicon-photodiode sensor. It can assess LED lighting (illuminance, frequency and duty of pulsed white LEDs) and offers data hold, MAX/MIN and a large backlit LCD for accurate readings anywhere.
Call for price
The Kyoritsu KEW 8215 is a demonstration panel that shows the operation of Kyoritsu AC, AC/DC and leakage clamp meters, including open-jaw models like the KEW FORK 2300R and KEW MATE 2000 series. It generates known test values — about 15 A AC/DC, 30 mA AC leakage, 12 V AC, 15 V DC and 10 Ω — so instruments can be clamped or probed for live sales and training demonstrations.
Call for price
The Kyoritsu KEW 5204BT is a Bluetooth digital light meter measuring illuminance from 0 to 199,900 lx with 0.1 lx resolution via a silicon-photodiode sensor. Bluetooth transfers readings wirelessly for easy logging and reporting, and cosine-corrected optics with ±4% accuracy make it a precise tool for lighting surveys and LED evaluation.
Call for price
The Kyoritsu KT 170 is a portable two-pole voltage tester that checks for the presence and level of AC and DC voltage up to 600 V, with clear visual (LED) and audible alarms for live voltage. Rugged with a protection cover and replaceable 4 mm tips, it is a dependable safety tool for electricians and maintenance staff.
Call for price
The Kyoritsu KT 171 is a handheld two-pole voltage tester with an LCD display for measuring AC and DC voltages up to 690 V. Built to IEC 61243-3 with CAT III 690 V / CAT IV 600 V safety, it is a rugged, reliable tool for electricians and technicians to verify live and dead circuits.
Call for price
The Kyoritsu KEW 8031F is a fuse-incorporated phase rotation indicator that quickly and reliably checks the phase sequence of three-phase supplies from 110 to 600 V, with lamps that also indicate open phases. Small, light and safety-designed with no exposed metal parts and push-button operation, it helps prevent mis-wired connections and equipment damage.
Call for price
The Kyoritsu KEW 8035 is a non-contact phase indicator that checks three-phase rotation and detects an open phase without touching bare conductors. With a wide 70–1000 V AC range and insulated crocodile clips that grip insulated cables from 2.4 to 30 mm, it is a safe, convenient tool for phase-sequence checks, rated CAT IV 600 V / CAT III 1000 V.
Call for price
The Kyoritsu KEW 6205 is a handheld portable appliance tester (PAT) for fast, easy test-and-tag of electrical equipment. It offers 250 V/500 V insulation testing, earth-leakage and load tests on appliances rated to 10 A, a 10 mA earth-leakage trigger and 30 mA RCD test, with a built-in isolating transformer to test portable RCDs without tripping the building supply. Battery operated with PASS/FAIL colour-status display.
Call for price
The Kyoritsu KEW 4118A is a digital loop impedance and prospective fault/short-circuit current tester with anti-trip (no-trip RCD) technology, measuring loop impedance to 2000 Ohm and PSC up to 20 kA, with wiring-status LEDs, rated CAT III 300 V.
Call for price
The Kyoritsu KEW 4140 is a complete loop, PFC, PSC and phase-rotation tester for electrical installations to IEC 60364-6. It measures loop impedance up to 2000 Ω with a 15 mA AC test current and anti-trip technology for trip-free testing on RCDs rated 30 mA and above, plus voltage and frequency, on a dual display. IP54-rated for site use.
Call for price
The Kyoritsu KEW 5406A is a digital RCD/ELCB tester that verifies residual-current devices at 10 to 500 mA rated currents with x1/2, x1, x5, DC and auto-ramp tests, measuring trip time to 1 ms resolution, with wiring-status LEDs, IP54-rated and CAT III 300 V.
Call for price
The Kyoritsu KEW 5410 is a compact digital RCD/ELCB tester for checking residual-current devices, with selectable rated trip currents (15–500 mA), x½/x1/x5 test multipliers, trip-time and ramp (trip-out current) measurement, and auto contact-voltage detection. Operating up to 400 V and IP54-rated at just 220 g, it is an easy, reliable tool for electricians and inspectors.
Call for price
The Kyoritsu KEW 6018 is a comprehensive multi-function installation tester covering insulation, continuity, earth resistance, loop impedance, RCD, PSC/PFC, contact voltage and phase rotation in one instrument, rated CAT III 600 V, for complete electrical installation verification.
Call for price
The Kyoritsu KEW 6516 is a comprehensive multifunction installation tester for verifying and troubleshooting electrical installations to the latest standards. It covers continuity, insulation, loop/Zs, RCD, earth and phase-sequence testing, plus SPD (surge-protector) trigger-voltage and PAT tests for class I/II appliances, and downloads results over USB (8212-USB) to print Zs-limit comparison reports.
Call for price
The Kyoritsu KEW 2062 is a versatile clamp power meter for single-phase and three-phase systems (1P2W, 1P3W, 3P3W and 3P4W, balanced or unbalanced). Its dual display shows two parameters at once, measuring AC voltage to 1000 V, current to 1000 A, active/reactive/apparent power, power factor, frequency, phase angle, phase rotation and harmonics (THD-R/THD-F), rated CAT IV 600 V / CAT III 1000 V.
Bench Multimeters