MEGGER VLF CR60HP and VLF CR80 Cosine Rectangular Cable Test Systems

MEGGER VLF CR60HP and VLF CR80

Powerful 0.1 Hz VLF test system with energy recovery for testing of cables with Cosine Rectangular Wave voltage according to VDE, IEC, and IEEE.

In accordance with most regulations, cables and joints must be tested after installation or repair. The Seba KMT VLF Test System CR 60 kV can be used to test cables with operating voltage levels up to 36 kV. The system consists of a control unit and a HV unit. The high test capacity of 6.5 μF permits the simultaneous testing of all three phases. Positive and negative DC testing of cables and connected switchgear can be carried out by DC Mode.

This VLF Test System CR 60 kV can be used both as a stand-alone system and as an integrated part of a test van system.

MEGGER VLF CR60HP and VLF CR80 Cosine Rectangular Cable Test Systems Specifications:

VLF 80 kV

• 0.1 Hz VLF operation:BasePlus
• Wave shape:Cosine-Rectangular
• Output voltage:0 … 80 kVrms0 … 80 kVrms.
• Output current… 12.5 mA12.5 mA @ 80 kV (resolution 10 μA)
• Frequency:0.1 Hz
• Output voltage:0 … – 80 kV0 … ± 80 kV.
• Dimensions (W x H x D):1350 x 1250 x 1100 (1500**) mm
• Weight:380 kg
• Protection class: IP 20O.
• perating temperature:- 25 °C … + 55 °C
• Storage temperature:- 40 °C … + 70 °C

VLF CR-60-HP

• 0.1Hz VLF operation
• Wave shape: Cosine-Rectangular.
• Output voltage:0 … 60 kV RMS
• Output current… 17mA (resolution 10 μA).
• Frequency:0.1 Hz
• Dimensions (W x H x D):1350 x 1250 x 1100 (1500**) mm.
• Weight:380 kg
• Protection class: IP 20.
• Operating temperature:- 25 °C … + 55 °C
• Storage temperature:- 40 °C … + 70 °C.