The Fluke 941 measures illuminance in lux or foot-candles:
- Five lux ranges to 200,000 lux and four fc ranges to 20,000 fc
- ±3% accuracy calibrated to 2854 K incandescent, ±6% for other visible light sources
- Hold, MIN/MAX, auto or manual ranging and zero adjust
- Available from MME, a trusted T&M supplier.
The Fluke 931 measures optical RPM up to 99,999 and contact surface speed with ±0.02% accuracy. Built for industrial motor and conveyor audits, it ships with local warranty and express UAE delivery from MME.
- Optical Range: 1 to 99,999 RPM up to 500 mm distance.
- Contact Range: 1 to 19,999 RPM plus linear speed (m/min).
- Precision: ±0.02% of reading ±1 digit accuracy.
- Memory: Max, Min, Average, and Last reading recall.
- Power & Size: 40-hour runtime via 2 × AA batteries; 250 g.
The Fluke 17B MAX is a 6000-count digital multimeter for electrical and electronic work:
- Measures 1000 V AC/DC, 10 A, resistance, capacitance, frequency, duty cycle and type K temperature
- Red LED warns of hazardous voltage at 30 V and above
- Input Alert, backlight and IP40, CAT III 600 V
- Built for HVAC maintenance, facility checks, and precise circuit testing.
The Fluke C35 is a 600D polyester soft case, 216 x 132 x 76 mm, sized for Fluke 20, 70, 11X and 170 Series digital multimeters. Its top opens sideways, so the meter can be read and used without taking it out.
The Fluke 87V is a True-RMS industrial multimeter for motor drives and plant troubleshooting:
- Selectable low-pass filter for accurate voltage and frequency readings on variable frequency drives
- Peak capture of intermittents as short as 250 µs
- 1000 V AC/DC, 10 A, temperature with the included 80BK probe
- CAT III 1000 V / CAT IV 600 V safety rating
- Fluke 700HTPK Hydraulic Test Pressure Kit for precise pressure testing
- Accurate and reliable results
- Designed for demanding applications
- Easy to use and maintain
- Long-lasting performance
- Meets industry standards
- Compliant with safety regulations
- Fluke TL223 SureGrip Electrical Test Lead Set for safe and reliable electrical testing
- Designed for use with multimeters and other electrical test equipment
- SureGrip connectors ensure secure connections
- Test leads are made with high-quality materials for durability
- Perfect for technicians and engineers in various industries
- Meets or exceeds industry standards for safety and performance
- Order now from MME for top-quality electrical test leads
- Insulated test leads for safe electrical measurements
- SureGrip insulation for secure connections
- Designed for use with Fluke multimeters
- Enhance measurement accuracy and safety
- Reduce risk of electrical shock
- Perfect for technicians and engineers
- Meets industry standards for electrical safety
Fluke 3000 FC True-RMS Wireless Digital Multimeter with Fluke Connect™ technology for safe remote diagnostics.
- Live measurements up to 20m away to minimize arc-flash exposure.
- Rated for CAT III 1000V / CAT IV 600V with IP54 ingress protection.
- 100% genuine Fluke products supplied with UAE stock and warranty from MME.
Fluke 83V Average Responding Industrial Multimeter engineered for precise troubleshooting in heavy industrial and motor drive applications.
- Measures up to 1000V AC/DC and up to 10A (20A for 30 seconds).
- CAT III 1000V and CAT IV 600V safety compliance with removable holster.
- Genuine Fluke instruments with regional stock and local support from MME.
- Fluke 289 IMSK is a comprehensive service kit designed for industrial multimeters.
- Includes all necessary tools and accessories for maintenance and repair.
- Perfect for technicians and engineers working in harsh environments.
- Meets the demands of heavy-duty applications.
- Enhances productivity and efficiency.
- Reliable and accurate measurements.
- Long battery life and durable construction.
- Accurate measurements with 1.8% ±5 AC current range
- Wide voltage range with 1.5% ±5 accuracy
- DC voltage, DC mV, and resistance measurement capabilities
- Continuity test with ≤ 70 Ω detection
- Backlight display and data hold function
- CAT III 600 V safety rating and 30 mm jaw size
- Compact size with 2 AAA battery operation
- True-rms AC/DC clamp meter with iFlex
- Non-contact voltage measurement
- High accuracy and resolution
- Flexible current probe for precise measurements
- Compact and lightweight design
- Wide operating temperature range
- IEC 60529: IP30 protection
The Fluke 2AC VoltAlert™ is an always-on, pocket-sized non-contact voltage tester designed for rapid 90 V to 1000 V AC circuit verification.
- Senses 90 V AC to 1000 V AC through insulation with a bright red glowing tip.
- Ready to test instantly, featuring a dedicated push-button battery check.
- Certified CAT IV 1000 V overvoltage protection for residential, commercial, and industrial use.
- Advanced wire tracing technology for professionals
- Measures up to 600 V CAT IV
- Smart Sensor and Tip Sensor for precise detection
- NCV and battery monitoring capabilities
- Compact and ergonomic design for easy handling
- Long battery life for extended use
- Includes receiver and sensor for complete kit
- Coaxial, reflected laser beam technology
- 10 hours of continuous use
- Wireless communication up to 30 m
- IP 65 dustproof and water jets resistant
- Resolution: 1 μm and angular 10 μRad
- Measurement range: 0° to 360°
- Class 2 laser safety
- Accurate DC voltage measurement up to 1000V
- True-rms voltage measurement up to 1000V
- Current measurement with current clamp
- Frequency measurement up to 500 MHz
- Voltage/Herz ratio measurement
- Voltage unbalance measurement
- Current unbalance measurement
- Measures environment noise (A weighted): 30 to 130 dB
- Measures mechanical noise (C weighted): 35 to 130 dB
- Accurate sound level measurements
- Compact and rugged design
- Long battery life
- Easy-to-use interface
- Compliant with international standards
- True RMS measurement for accurate AC and DC current, voltage, and resistance readings.
- Range of 45 Hz to 65 Hz for AC current and 5.0 Hz to 500.0 Hz for frequency.
- Backlight and data hold functions for improved visibility and convenience.
- Category rating of CAT III 600 V and CAT IV 300 V for safe use in various applications.
- Two-year warranty for added peace of mind.
- Max wire diameter of 30 mm (600 MCM) and weight of 283 g for easy handling.
- Continuity test with ≤ 30 Ω and capacitance measurement up to 1000 μF.
- Advanced wire tracing capability for electrical diagnostics
- 6.1m range for deep wire location
- Professional-grade Fluke reliability
- Comprehensive kit for complete tracing tasks
- Suitable for maintenance and installation professionals
- Accurate wire path identification
- Durable construction for field use
- Fluke pneumatic test pump kit for pressure calibration
- 0 to 41 bar pressure range
- 3 kg lightweight design for portability
- Ideal for HVAC, industrial, and process testing
- Includes complete pump kit accessories
- Durable construction for field use
- Accurate pressure generation and measurement
- Measures pressure range: -14 to 3000 psi / -0.97 to 200 bar
- Designed for industrial process calibration and testing
- Rugged construction suitable for field and workshop environments
- Compatible with Fluke 700 series module system
- High accuracy for demanding measurement tasks
- Easy-to-read display for quick verification
- Built-in overpressure protection for sensor safety
- Fluke 700G05 pressure gauge with 2 bar measurement range
- Reliable accuracy for industrial process calibration tasks
- Durable construction suitable for field and workshop environments
- Compatible with Fluke 700 series modular system
- Easy-to-read display for quick pressure verification
- Efficient performance for maintenance and engineering teams
- Trusted Fluke quality for critical pressure measurements
- High-precision 4-channel process calibrator for voltage, current, resistance, frequency, and temperature
- Source and measure functions with 0.01% basic voltage/current accuracy
- 29 pressure module options for differential, gauge, vacuum, and absolute pressure measurement
- RTD and thermocouple measurement for Cu10 through PT-1000 and various thermocouple types
- Loop power supply function with 22 mA current limit and short-circuit protection
- Ramp and step source functions for automated calibration sequences
- Compact 200 x 96 x 47 mm design powered by 4 AA batteries
Bench Multimeters