Mitutoyo 500-178-30 digimatic caliper

Mitutoyo 500-178-30 digimatic caliper:

product overview

The Mitutoyo 500-178-30 digital caliper can works well in any conditions:dust,
Water,Oil. It can measure a dimension range of 0-150mm / 0-6″ with an accuracy of ±0.02mm / ±0.0010″.
in The Mitutoyo 500-178-30 ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).

function

1 Check the caliper jaws’ cleanliness first.
Measurement mistakes are brought on by the presence of particles such as dust, pleats, etc. between the caliper’s jaws.
2 Next, after locking the jaws, zero the display number using the key that was attached to the caliper.
3 Now, using your thumb, open the caliper’s jaws. Once the object is in between the two jaws, close the jaws so that they touch the object.
4 The size will then be seen on the screen.

working conditions

Any environment is suitable for this gadget to operate.
operating without errors in the presence of dust, water, and oil.
After usage, it is best to store it in the included protective box.

Mitutoyo 500-178-30 digimatic caliper features:

• Huge and distinct LCD readout.
• For incremental comparative measurements, the display may be Zero-Set at any slider point
• along the scale by pressing the ZERO/ABS key.
• This option also enables the reversion to absolute (ABS) coordinates and displays the real
• location relative to the origin point, which is often the point where the jaws are closed.
• Optional Data Hold Unit (959143).
• having a thumb roller.
• delivered in a fitting plastic container.

Mitutoyo 500-178-30 digimatic caliper specificatons:

• Range:     0 in [Min], 0 mm [Min], 6 in [Max], 150 mm [Max]
• Resolution:   (Length) 0.00050 in, 0.01000 mm
• Accuracy:   ±.001 in
• Upper Jaw Length:    1.570 in
• Lower Jaw Length:    1.570 in
• Display Type:   Digital LCD .295 in
• Batt Life:    3.5 Years (20,000 hours)
• Measuring System:    Inch/Metric
• Measurement Type: Inside, Outside, Step, Depth
• Mechanism:    Rack & Pinion
• Output SPC :    yes
• Type: Plain Caliper