Megger MIT515 5 kV Insulation Resistance Tester

Brand: Megger
SKU: 83226
Order code: 1001-935
Share

The Megger MIT515 is a 5 kV diagnostic insulation tester measuring up to 10 TΩ, with IR/DAR/PI/DD/SV/ramp tests in a rugged CAT IV 600 V, IP65-ready case — supplied by MME as an authorized Megger representative in the UAE.

  • Secure Purchase
  • Fast Delivery
  • Genuine Guarantee
  • Online Payment

Specifications

Specification MIT515, MIT525
AC Voltage (auto-ranging) 90-264 V rms, 47-63 Hz, 100 VA
Battery Charge Time 2.5 hours deep discharge, 2 hours normal
Battery Voltage 10.8 V, 5.2Ah Li-ion
Battery Life 6 hours at 5 kV with a 100 MΩ load
Test Voltage 250 V to 5 kV, User defined
User Defined Test Voltage Steps 40 V to 1 kV in 10 V steps, 1 kV to 5 kV in 25 V steps
Test Voltage Accuracy +4%, -0%, ±10 V at 1 GΩ load (0°C to 30°C)
Resistance Range Up to 15 TΩ at 5 kV
Accuracy ±5% at 1 TΩ to ±20% at 10 TΩ
Guard Terminal Performance Down to 250 kΩ with max. 1% error
Display Analog: 100 kΩ to 10 TΩ, Digital: 10 kΩ to 10 TΩ
Short Circuit / Charge Current 3 mA at 5 kV
Capacitor Charge/Discharge <3 s/μF to 5 kV, <250 ms/μF from 5 kV
Capacitance Range 10 nF to 25 μF
Current Range/Accuracy 0.01 nA to 6 mA, ±5% ±0.2 nA
Voltmeter Range/Accuracy 30 V to 660 V, ±3%, ±3V
Timer Range Up to 99 min 59 sec, 15 sec minimum
Memory Capacity
Test Modes IR, IR(t), DAR, PI
Interface
Real Time Output
Environmental Conditions Max altitude 3000 m, Operating temp -4 °F to +122 °F, Storage temp -13 °F to +149 °F, Humidity 90% RH non-condensing
IP Rating IP65 (lid closed), IP40 (lid open)
Safety CAT IV 600 V
Dimensions L 315 mm x W 285 mm x H 181 mm
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Megger MIT515 5 kV Insulation Resistance Tester”