MOHAMMAD MAHDI Electronics Trading LLC
Call for price
EXTECH PRT200 Non Contact Phase Sequence Tester Key Features :
- 75 to 1000VAC input voltage with 45 to 65Hz frequency range
- LEDs indicate phase orientation and whether each phase is live
- Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
- Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement
- Adjustable Hi/Lo LED brightness switch for making measurements in dimly lit areas or sunlight
- Fully insulated alligator clips with wide jaws
- Low battery warning
- Complete with three built-in 30″ test leads with large color-coded alligator clips, four AA batteries, and pouch case
Call for price
EXTECH 480403 Motor Rotation and 3Phase Tester Key Features :
- Indicates rotation direction of the motor
- Determine rotation of a motor without contact
- LEDs indicate phase orientation and whether each of the three phases is live
- Double molded durable housing
- Easy to use alligator clips with wide jaws
Call for price
Key Features :
- Checks phase sequence and phase status
- Tests up to 600VAC and displays graphical phase orientation on the large LCD
- Double molded durable housing
- Easy to use alligator clips with wide jaws
Call for price
EXTECH MG 500 Insulation Tester key features:
- High test voltages up to 10kV with Insulation Resistance to 500GOhm
- Polarization Index (PI) measurement
- Dielectric Absorption Ratio (DAR) measurement
- EnerSave™ limits test duration to 10 seconds to save energy
- Complete with built-in heavy-duty carrying case with cover, test leads, alligator clips, and 8 x C batteries
Call for Price
EXTECH MG325 CAT IV Insulation Tester True RMS key features
- Test Voltages of 250V, 500V, and 1000V
- Measure Insulation Resistance to 5.5GOhm (autoranging)
- AC Voltage measurement from 30 to 600V
- Polarization Index measurement (PI)
- Dielectric Absorption Ratio measurement (DAR)
- 10MOhm internal resistance test
Call for price
EXTECH MG320 CAT IV Insulation Tester True RMS MultiMeter key features
• Measure Insulation Resistance to 20GΩ
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test
• Comparison Mode allows user to set the Pass/Fail values for insulation measurements
• Step Voltage (10% steps at 50% to 120% of range)
• Auto-discharge of voltage test signal
• Lock Power On Function for hands-free operation
Call for price
EXTECH MG310 Digital Insulation Tester key features
• Test Voltages of 250V, 500V, and 1000V
• Measure Insulation Resistance to 5.5GOhm (autoranging)
• AC Voltage measurement from 30 to 600V
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)
• 10MOhm internal resistance test
Call for price
EXTECH MG302 Function Wireless True RMS MultiMeter Insulation Tester key features:
• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage
Call for Price
EXTECH MG300 Function Wireless True RMS MultiMeter Insulation Tester key features:
• Wireless USB interface transmits measurement data to a PC
• Backlit super large triple display
• 125V, 250V, 500V, and 1000V test voltages
• Insulation Resistance from 0.001MOhm to 4000MOhm
• Auto discharge of capacitive voltage
Call for price
EXTECH 380396 Key Features
• Test Voltages of 500V, 1000V, 2500V, and 5000V
• Measure Insulation Resistance to 60GOhm
• Large 6000 count display with bargraph and backlight
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)
Call for price
EXTECH 380395 key features:
• Test Voltages of 500V, 1000V, 2500V, and 5000V
• Measure Insulation Resistance to 60GOhm
• Large 6000 count display with bargraph and backlight
• Polarization Index measurement (PI)
• Dielectric Absorption Ratio measurement (DAR)
Call for price
EXTECH 380363 Digital High Voltage Insulation Tester key features:
• 250V, 500V and 1000V Test Voltages
• Measure Insulation Resistance to 10GOhm
• Large LCD display with analog bargraph
• Lo Ohm function for testing connections
• Automatic discharge of capacitive voltage charges
Call for Price
EXTECH LCR205 SMD Component Fixture key features:
• Adjustment range: 0 to 0.375″ (0.95cm)
• Terminals: 3 blades (High, Low, Guard)
• Adjustment knob
Call for price
EXTECH LCR200 LCR Meter key features
- Five test frequencies
- Set Hi/Lo limits using absolute values or percentage limits
- Relative mode function
- Parallel or Series equivalent circuit
- Auto power off, Low battery, and over-range indicators
- Built-in test fixture or use external test leads
Call for Price
EXTECH 380193 Passive Component LCR Meter key features:
- Simultaneous 20,000/10,000 count display of the primary parameter (L, C or R)
- Secondary parameter of Q (quality), D (dissipation) or R (resistance)
- Set Hi/Lo limits using absolute values or percentage limits
- Parallel or Series equivalent circuit
- Automatic blown fuse indication
- Built-in test fixture or use external test leads
Call for price
EXTECH RD300 Refrigerant Leak Detector key features:
- Detects all standard refrigerants using a heated diode sensor
- LED light at probe tip (with on/off switch) for working in dimly lit areas
- LEDs display user-selectable High/Medium/Low levels with sensitivity of 0.25/0.50/0.99 oz per year
- Audible and Visual alert with mute button
- Low battery indicator
- Field replaceable sensor and LED light tip
- Complete with leak test bottle, 9V battery, and protective hard carrying case
Call for Price
EXTECH RD200 Refrigerant Leak Detector key features:
• Multi-colored LED light bar indicates the level of refrigerant leakage detected
• 19.8″ (50.2cm) flexible gooseneck retains its shape and provides easy access in difficult to reach locations
• Audible and Visual alert
• Low battery indicator
• Convenient field replaceable sensor (RD200-S)
• Leak Test Bottle included for a quick and easy self test on meter performance
Call for price
EXTECH FG100 Combustible Gas Leak Detector key features
- Detects combustible gases – Liquefied Natural Gas (LNG) and Liquefied Propane Gas (LPG) from 500 to 6500ppm
- Highly sensitive detection circuitry
- Audible and visual alarm
- Continuous operation up to 4 hours
- LED indicators for gas leakage and static absorption
Call for price
EXTECH EZ40 EzFleX Combustible Gas Detector key features:
• Quickly identifies and pinpoints gas leaks
• High Sensitivity
• One hand operation with thumb controlled sensitivity adjustment, to eliminate background gas levels
• Visible and audible alarm at 10% (LEL) Lower Explosive Limit for methane
• Locate the smallest leaks
• Complete with 3 “C” batteries
Call for price
Compact EXTECH PQ2071 with True RMS for precise AC power measurements, ideal for electricians and technicians.
Call for Price
Accurately measure power with the EXTECH 382075, ideal for 3-phase systems analysis.
Call for price
Experience high-accuracy current measurement with the EXTECH 380976-K, ideal for electrical professionals and industrial environments.
Call for price
High accuracy EXTECH 380940 Clamp-on for precise AC/DC measurements. Ideal for electricians.
Call for price
Achieve precise measurements with EXTECH MP530A MultiMeter, perfect for professional electricians. Ensure accurate diagnostics effortlessly.
Bench Multimeters