MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
AED 2,250 (excl.VAT)
The Megger MIT310 is a rugged insulation and continuity tester with 250/500/1000 V insulation to 999 MΩ, ~200 mA continuity and 0–600 V voltage measurement, in a CAT III 600 V, IP54 handheld.
AED 2,080 (excl.VAT)
Achieve precise ground leakage measurements with the Megger DCM1500S Clamp Meter. Ideal for professional electricians.
AED 2,007 (excl.VAT)
The Megger MCC1010 is a high-accuracy 1000 A AC current clamp (1000:1) that converts large AC currents into a safe low-level signal for power and energy analysers, with 0.3% accuracy and a 15 Hz–10 kHz bandwidth.
AED 1,990 (excl.VAT)
The Megger DCM300E is a high-resolution AC clamp meter for checking earth-leakage currents and nuisance RCD tripping, with a dedicated 30 mA range down to 10 µA resolution and ranges to 300 A.
AED 1,980 (excl.VAT)
The Megger DH4-C (Ord. No. 1006-444) is a two-wire, four-terminal duplex handspike probe lead set for DLRO10, DLRO10X and DLRO10HD low resistance ohmmeters, with gold-plated needle tips.
AED 1,980 (excl.VAT)
The Megger VF6 EX is a hazardous-area (Ex-rated) non-contact AC voltage detector for use on gas platforms and in petrochemical plants, identifying live conductors from 12 V to 1000 V at CAT IV 1000 V with LED, audible and vibration alerts and a built-in LED torch.
AED 1,950 (excl.VAT)
The Megger MIT210 is a compact pocket-sized insulation and continuity tester with a digital display and analogue arc, offering 250/500/1000 V insulation testing to 1000 MΩ, 200 mA continuity and voltage measurement.
Original price was: AED 2,100.AED 1,850Current price is: AED 1,850. (excl.VAT)
The Megger DPM1000 is a True RMS AC/DC power clamp meter measuring current, voltage, power, power factor and harmonics up to 1000 A / 1000 V, with Bluetooth and CAT IV 600 V safety.
Original price was: AED 1,999.AED 1,750Current price is: AED 1,750. (excl.VAT)
-
Display: It features a high contrast 320×240 TFT colour display with a 50,000-count dual display capability.
-
Safety Rating: The multimeter is safety rated for CAT III 1000 V and CAT IV 600 V.
-
Measurement Type: It provides True RMS AC and AC+DC measurements, allowing for accurate readings of complex signals or nonlinear loads.
-
Accuracy: The device boasts a ±0.05% basic DC voltage accuracy.
-
Frequency Range: It has an AC bandwidth specified up to 10 kHz and can measure electronic frequency up to 10 MHz.
-
Data Logging Memory: The instrument can store up to 9,000 readings directly on the device.
-
Connectivity: It includes built-in Bluetooth connectivity and integrates with the Megger AVO Link app for Android and iOS, enabling real-time result sharing and offline analysis.
-
Battery Life: It operates on a rechargeable Li-ion battery that provides up to 15 hours of use from a single charge.
-
Durability: The multimeter features a rugged design that is tested to withstand a 2 m (6.5 ft) drop.
-
Ingress Protection: It has a double molded enclosure with an IP40 rating, providing water and dust resistance.
AED 1,490 (excl.VAT)
The Megger 1002-643 is a 10 m (33 ft) test lead set with 6 kV dual-insulated silicone cables and medium insulated clips (18 mm jaw), for insulation-resistance testing with Megger insulation testers such as the MIT510/2 and S1.
AED 1,457 (excl.VAT)
The Megger PVK330 is a photovoltaic test kit that pairs the PVM210 irradiance meter with a DC clamp multimeter and specialist PV leads. It lets solar installers measure irradiance and take non-intrusive DC current, voltage, open-circuit and short-circuit readings on PV arrays up to 1000 V DC.
Original price was: AED 1,699.AED 1,430Current price is: AED 1,430. (excl.VAT)
The Megger MPCC230 Pro is a plug-in circuit checker that combines socket, RCD and earth-loop testing with true-RMS voltage, frequency and harmonics/THD analysis in one pocket-sized instrument.
AED 1,415 (excl.VAT)
Experience precise current measurement up to 1500 A TRMS with the Megger DCM1500, designed for professional-grade electrical testing.
Original price was: AED 1,500.AED 1,350Current price is: AED 1,350. (excl.VAT)
- Ultra-fine 0.001 mA resolution for precise leakage detection
- Wide measurement range of 0.1 mA to 100 A AC current
- Large 40 mm jaw size for easy conductor access
- True RMS readings for accurate measurements on noisy waveforms
- Includes low-pass filter to stabilize readings in electrically noisy environments
- High-contrast LCD display with Data Hold function
AED 1,347 (excl.VAT)
The Megger PVK320 is a photovoltaic test kit combining the PVM210 irradiance meter and AVO410 multimeter with specialist PV test leads. It lets solar installers measure irradiance, verify open-circuit voltage and short-circuit current, and take voltage/current readings up to 1000 V DC on PV arrays.
AED 1,292 (excl.VAT)
The Megger VF5 is a rugged CAT IV 1000 V non-contact AC voltage detector that identifies live conductors from 12 V to 1000 V with LED, audible and vibration alerts, a bright LED torch and IP67 sealing for demanding site conditions.
Original price was: AED 1,299.AED 1,199Current price is: AED 1,199. (excl.VAT)
The Megger MCT105 is a compact cable locator and tracer for finding and following buried cables, conductors and metallic pipes, with a 125 kHz transmitter, non-contact voltage detection and tracing to about 2 m.
Original price was: AED 1,399.AED 1,199Current price is: AED 1,199. (excl.VAT)
The Megger FCC3450 is a True RMS flexible clamp meter measuring up to 3000 A AC and 1000 V AC/DC, with a flexible coil that wraps around busbars and large conductors up to 150 mm.
AED 1,089 (excl.VAT)
The Megger AVO840 TRMS Digital Multimeter is engineered for electricians and engineers who demand precision, ruggedness, and smart connectivity. With True RMS accuracy, Low-Z mode, IP44 protection, and Bluetooth data logging, it ensures dependable results for industrial, commercial, and HVAC applications.
Original price was: AED 999.AED 950Current price is: AED 950. (excl.VAT)
The Megger MET1000 is an all-in-one true-RMS electrical tester combining a two-pole voltage tester, a 200 A current clamp, resistance, continuity and phase-rotation testing in one rugged CAT IV 600 V / CAT III 1000 V, IP65 instrument.
AED 852 (excl.VAT)
The Megger MST210 is a plug-in BS1363 socket tester that instantly identifies over 17 wiring faults using simple green and red LEDs, for fast, safe checking of 230 V socket outlets.
AED 820 (excl.VAT)
The Megger ETK30 (1010-176) is a 30 m earth-testing cable reel kit with 20 m and 30 m daisy-chainable test leads on reels, earth spikes, connecting leads and a holdall, for use with Megger earth testers and compatible MFTs.
Original price was: AED 850.AED 800Current price is: AED 800. (excl.VAT)
Megger DCM340 provides accurate 1000V measurements, perfect for electrical diagnostics.
Original price was: AED 899.AED 740Current price is: AED 740. (excl.VAT)
The Megger AVO415 TRMS Digital Multimeter is a professional tool designed for modern electrical systems. With True RMS accuracy, VFD low-pass filter, and CAT IV 600 V protection, it’s built for precision, safety, and reliability in industrial, HVAC, and renewable applications.
AED 695 (excl.VAT)
The Megger PSI410 is a professional phase sequence indicator that confirms three-phase rotation using clear LED indication and an audible tone. Rated CAT IV 600 V with an IP54 body, it identifies clockwise or counter-clockwise sequence quickly and safely on installations up to 500 V.
AED 650 (excl.VAT)
High accuracy Megger DCM330-Fork Multimeter for precise electrical measurements. Perfect for professional electricians.
AED 572 (excl.VAT)
Get accurate measurements with the Megger DCM320 Clamp Meter, ideal for electrical work with its 400A capacity.
AED 511 (excl.VAT)
The Megger MPU690 is a battery-powered proving unit that produces known AC voltages from 50 V up to 690 V, letting electricians verify that voltage testers and indicators are working correctly before and after use.
AED 450 (excl.VAT)
The Megger PVM210 is a pocket-sized solar irradiance meter for photovoltaic installers. It measures irradiance up to 1999 W/m² with 0.1 W/m² resolution and a hold function, helping optimise panel positioning and verify a module’s expected short-circuit current — all from a lightweight 90 g handheld.
AED 418 (excl.VAT)
Megger DCM310 clamp meter provides accurate 1000A readings for efficient electrical testing. Ideal for electricians. Order today.
Original price was: AED 399.AED 350Current price is: AED 350. (excl.VAT)
The Megger MFL205 is a transmitter-receiver fuse locator that quickly identifies the individual fuse or circuit breaker feeding a circuit, using visual and audible indication with automatic sensitivity on 110/230 V systems.
AED 270 (excl.VAT)
The Megger MLM50 is a compact laser distance meter measuring 0.05–50 m to ±1.5 mm accuracy, with distance, area, volume and min/max modes, a backlit display and IP54 build.
Original price was: AED 299.AED 249Current price is: AED 249. (excl.VAT)
The Megger AVO215 True-RMS Digital Multimeter delivers accurate AC/DC measurements up to 600 V and 10 A, with CAT III 600 V safety, 6000-count backlit LCD, and rugged housing. Perfect for electricians, HVAC, and industrial technicians
AED 195 (excl.VAT)
The Megger VF-T5 combines a CAT IV 1000 V non-contact AC voltage detector with a laser-guided infrared thermometer in one pocket tool, letting electricians check for live conductors and measure surface temperatures from -30 to +280 C with LED, audible and vibration alerts.
AED 181 (excl.VAT)
The Megger SIA10 is a socket interface adaptor that lets electricians carry out loop impedance and RCD testing at a UK BS1363 13 A socket without dismantling it. It plugs into the socket and connects to an installation tester by three colour-coded leads, making testing faster, safer and mark-free.
AED 120 (excl.VAT)
The Megger MSL10 is a handheld stud locator that finds wooden and metal studs and joists and detects live AC cables behind plasterboard, with audible and visual indication — helping electricians drill and fix safely.
Bench Multimeters