Description

The Fluke 1507 is the compact insulation tester for motors, cables and panels when you do not need a 5 kV set. It runs 50, 100, 250, 500 and 1000 V tests from 0.01 MΩ to 10 GΩ, then calculates polarization index and dielectric absorption ratio so you are not timing a 10-minute test by hand. Compare (pass/fail) repeats the same limit on the next motor. It holds off the test if more than 30 V is already on the terminals, then discharges the circuit.

See Fluke instruments and insulation resistance testers. Step down to the Fluke 1503 insulation tester if you only need 500 V and 1000 V, or step up to the Fluke 1587 FC insulation multimeter when you also want a full DMM. When the job is 5 kV and above, read 5 kV vs 10 kV vs 15 kV insulation testers.

Fluke-1507 Key Features

AC/DC Voltage Measurement
Accuracy: Range
Resolution: 0.1 V
50 Hz to 400 Hz ± (% of Rdg + Digits): ±(2% + 3)
Input impedance: 3 MΩ (nominal), < 100 pF
Common mode rejection ratio (1 kΩ unbalanced):: > 60 dB at DC, 50 or 60 Hz
Overload protection: 600 V rms or DC
Earth Bond Resistance Measurement

Who Needs the Fluke Fluke-1507?

Field technicians search for a dependable Fluke Fluke-1507 when troubleshooting HVAC, electrical, or industrial systems. Engineers look up model-level specs before specifying instruments on drawings. Maintenance teams compare kits and accessories. Buyers searching “buy Fluke Fluke-1507” or “Fluke-1507 UAE” use this listing to confirm the correct SKU and request pricing from MME.

Fluke-1507 Applications

Use the Fluke Fluke-1507 in commissioning, preventive maintenance, diagnostics, and acceptance testing where accurate measurements matter. Match the instrument to your category and environment using only the published specifications on this page.

Fluke 1507 questions

What to confirm before an insulation survey:

PI is the 10-minute reading divided by the 1-minute reading; DAR is the 1-minute reading divided by the 30-second reading.
Test only dead circuits. The meter is meant to refuse the test above 30 V on the terminals.
Ask MME for UAE stock. This page does not set a shipping promise.

Why Buy Fluke-1507 from MME?

MME supplies measurement and test equipment across the UAE with product pages that keep brand, model, and SKU accurate. Request a quote for the Fluke Fluke-1507 and related accessories from mme-ae.com.

Fluke-1507 Specifications

AC/DC Voltage Measurement
Accuracy	Range	600.0 V
	Resolution	0.1 V
	50 Hz to 400 Hz ± (% of Rdg + Digits)	±(2% + 3)
Input impedance	3 MΩ (nominal), < 100 pF
Common mode rejection ratio (1 kΩ unbalanced):	> 60 dB at DC, 50 or 60 Hz
Overload protection	600 V rms or DC
Earth Bond Resistance Measurement
Range/Resolution	20.00 Ω	0.01 Ω
	200.0 Ω	0.1 Ω
	2000 Ω	1.0 Ω
	20.00 kΩ	0.01 kΩ
Accuracy	±(1.5% + 3)
Overload protection	2 V rms or DC
Open circuit test voltage	> 4.0 V, < 8 V
Short circuit current	> 200.0 mA
Insulation Specifications
Measurement range	0.01 MΩ to 10 GΩ
Test voltage	50 V, 100 V, 250 V, 500 V, 1000 V
Test voltage accuracy	+ 20%, – 0%
Short circuit current	1 mA nominal
Auto discharge	Discharge time < 0.5 second for C = 1 µF or less
Live circuit indicator	Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum capacitive load	Operable with up to 1 µF load
Measure accuracy	50 V	±(3% + 5)
	100 V	±(3% + 5)
	250 V	±(1.5% + 5)
	500 V	±(1.5% + 5)
	1000 V	±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ
General Specifications
Maximum voltage applied to any terminal:	600 V AC rms or DC
Storage temperature	-40°C to 60°C (-40°F to 140°F)
Operating temperature	-20°C to 55°C (-4°F to 131°F)
Temperature coefficient	0.05 x (specified accuracy) per °C for temperatures < 18°C or > 28°C (< 64°F or > 82°F)
Relative humidity
	0% to 95% @ 10°C to 30°C (50°F to 86°F)
	0% to 75% @ 30°C to 40°C (86°F to 104°F)
	0% to 40% @ 40°C to 55°C (104°F to 131°F)
Vibration	Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
Shock	1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
Electromagnetic compatibility	In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
Safety	Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
Certifications	CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
Batteries	Four AA batteries (NEDA 15A or IEC LR6)
Battery life	Insulation test use:	Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
	Resistance measurements:	Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
Size (H x W x L)	5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
Weight	550 g (1.2 lb)
IP rating	IP40
Altitude	Operating	2000 m CAT IV 600 V, 3000 m CAT III 600 V
	Non-operating (storage)	12,000 m
Over-range capability	110% of range
Included accessories	TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe

Reviews (0)

Rated 0 out of 5

0 reviews

Rated 5 out of 5

Rated 4 out of 5

Rated 3 out of 5

Rated 2 out of 5

Rated 1 out of 5

Reviews

Clear filters

There are no reviews yet.

Be the first to review “Fluke-1507 Insulation Resistance Tester”

You must be logged in to post a review.

Fluke-1507 Insulation Resistance Tester

Fluke-1507 Key Features

Who Needs the Fluke Fluke-1507?

Fluke-1507 Applications

Fluke 1507 questions

Why Buy Fluke-1507 from MME?

Fluke-1507 Specifications

Datasheet

User Manual

Reviews

Fluke-1507 Insulation Resistance Tester

Fluke-1507 Key Features

Who Needs the Fluke Fluke-1507?

Fluke-1507 Applications

Fluke 1507 questions

Why Buy Fluke-1507 from MME?

Fluke-1507 Specifications

Datasheet

User Manual

Reviews

You may also like