Megger MFT-X1-BS Multifunction Tester + EVCA210 EV Adapter (MME Bundle)

Megger MFT-X1-BS with EVCA210 — Installation & EV Charge-Point Testing

The Megger MFT-X1-BS is an MME bundle: Megger sells the MFT-X1-BS (part 1012-223) as the tester only, and MME pairs it with the separate Megger EVCA210 EV charging-point adapter, giving electricians one bundle for both standard electrical-installation testing and Mode 3 EV charger commissioning. It covers insulation, continuity, True Loop™ impedance, full RCD and earth testing, with a colour display, Confidence Meter™ and Bluetooth CertSuite certification.

Who the Megger MFT-X1-BS bundle is for

The Megger MFT-X1-BS bundle is for electrical contractors, EV charger installers and facility teams who certify LV installations and Mode 3 AC charge points with one tester. The MFT-X1-BS (Megger part 1012-223) is the BS1363 plug version of the MFT-X1, which suits the BS1363 sockets used in the UAE. The EVCA210 adapter stands in for the vehicle, so the charge point can be switched on and tested without an EV on site.

From Megger’s MFT-X1 and EVCA210/EVCA210-UK datasheets:

• True Loop 3-wire no-trip loop testing with the Confidence Meter, 0.001 Ω resolution and prospective fault current to 50 kA
• RCD Type AC, A, B and selective versions, auto sequence ½×, 1×, 2×, 5× IΔn, ramp, 0°/180°; Type B at 10 to 500 mA; RDC (Type EV) with a 30 mA Type A RCD
• EVCA210: PP simulation NC/13/20/32/63 A, CP states A–D, CP error E, PE error and manual PE pre-test, up to 250 V single-phase or 430 V three-phase, IP54, CAT II 300 V, about 780 g
• MFT-X1: CAT III 600 V / CAT IV 300 V, IP54, 480 × 272 colour screen, 4400 mAh Li-ion for more than 15 hours, 1.57 kg

MME is an authorized Megger representative in the UAE. Browse our multifunction installation testers and the Megger range. Already have a tester? See the Megger MFT-X1 on its own or the Megger EVCA210 adapter. For automated EVSE test sequences, add the Megger EVX100. New to MFTs? Read what a multifunction tester is, or compare the Megger MFT1741.

Megger MFT-X1-BS Key Features

What the Megger MFT-X1-BS bundle covers in one case:

• EV charge-point testing — the EVCA210 adapter simulates Mode 3 charging states (CP/PP), simulates CP error E and PE (earth) faults, and lets the MFT-X1 verify RCD Type B or RDC-DD protection on Mode 3 charging stations.
• Stabilised insulation testing — 50 V–1000 V DC plus variable 50–999 V, readings to 999 MΩ at 1000 V (output −0% +2% +2 V).
• Continuity — 205 mA (±5 mA) or 10 mA test current, 0.01 Ω to 999 kΩ.
• True Loop™ impedance — high-resolution 2-wire and 3-wire no-trip loop testing, with Confidence Meter™ for fast, reliable results.
• Full RCD testing — Type AC, A, B and selective (S) versions; ½/1/2/5×I, ramp, auto sequence and touch-voltage display.
• Earth resistance & voltage — earth-electrode testing plus voltage, frequency and automatic phase-rotation measurement.
• Bluetooth CertSuite — low-energy Bluetooth® to Android/iOS with cloud-based CertSuite certification software.
• Rugged & long-running — colour TFT display, CAT III 600 V / CAT IV 300 V, IP54, Li-ion battery giving >15 hours per charge.

Megger MFT-X1-BS Applications

The MFT-X1-BS with EVCA210 is ideal for electricians and contractors who commission and certify both electrical installations and EV charging points — combining full installation testing with dedicated Mode 3 EV charger verification in a single MME bundle.

What comes with the Megger MFT-X1-BS bundle

What is in the MME bundle (the Megger MFT-X1-BS 1012-223 standard accessories, plus the EVCA210 added by MME):

• Megger MFT-X1-BS multifunction tester
• EVCA210 EV charging-point adapter
• SP5 switched test probe and colour-coded test leads with probes, clips and grabbers
• Earth test spike and leads kit
• Li-ion battery and charger
• Mains socket interface adaptor, neck strap and hard carry case
• Quick-start guide and calibration certificate

Megger MFT-X1-BS FAQ

What installers ask about the MFT-X1-BS bundle:

• What does the -BS mean? It is the BS1363 version (1012-223). Megger also lists Schuko (-SC), Swiss (-CH) and AUS/NZ (-AU) versions with the same test functions.
• Do I need a car to test a charge point? No. The EVCA210 rotary switches set the PP and CP states, so the charger switches on as if a vehicle were connected.
• Can it test 6 mA DC (RDC-DD) protected chargers? Yes. Megger lists RDC (Type EV) testing with a 30 mA Type A RCD, plus a 3 mA non-trip loop range for those circuits.
• How do results get into CertSuite? Over Bluetooth Low Energy to the Megger CertSuite app on Android or iOS, which syncs to the cloud.

Why Buy from MME in UAE

MOHAMMAD MAHDI Electronics Trading LLC (MME) is your trusted supplier of genuine Megger test and measurement equipment in the UAE. We offer competitive pricing and knowledgeable after-sales support across Dubai, Abu Dhabi and the wider UAE. Contact us on WhatsApp for the latest price and availability.

Megger Mft-X1 Datasheet PdfPDF Download the Megger MFT-X1 datasheet (PDF)PDF.