Fluke 190-504-III ScopeMeter, 500 MHz, 4 channels
Call for Price
Fluke 190-202-III-S ScopeMeter with FlukeView-2 software
Call for Price
Fluke 190-102-III-S ScopeMeter with FlukeView-2 software
Include:
- ScopeMeter
- Power Adapter
- Testlead Set
- 2 x Probe
- Handstrap
- Hangstrap
- USB-Cable
- WiFi Dongle
- Power Cord Set
- Carrying Case
- Li-ion Battery Pack
- FlukeView Activation Instructions
- User Manual
- ScopeMeter Software Package (full version)
SKU:
79033
MME Shopping Event
Hurry and get discounts on Most of MME Products up to 20%
Call for Price
19
People watching this product now!
Fluke ScopeMeter® 190-102/S
Fluke 190-102-III-S Accurate and versatile, this handheld oscilloscope offers fast sampling rates of up to 5 GS/s, 200 ps resolution, and deep memory of 10,000 samples per channel. Make measurements involving timing or amplitude on a three-phase or three-axis control system, or compare and contrast multiple test points in the circuit being tested.
Fluke ScopeMeter 190 102 III S Features
- Up to four independent floating isolated inputs, up to 1000 V
- Up to 5 GS/s real time sampling (depending on model and channels used)
- Deep memory: 10,000 points per trace waveform capture (scope mode)
- CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
- Up to seven hours of battery operation using BP291
- Large, bright color display is easy to view in nearly any environment
- Easy to store and view historical data and transfer to a PC via USB or Wifi
- Convenient battery access door for quick battery swaps in the field
- IP51 rating, dust and drip-proof
- Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals
- Frequency spectrum using FFT-analysis
- Automatic capture and REPLAY of 100 screens
- ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis
- TrendPlot Paperless Recorder mode with deep memory for longterm automatic measurements
- 5000 count DMM included in the 2-channel models
Fluke 190 102 III S Specifications:
Vertical Deflection | |
Number of Channels | 4 |
Bandwidth | 100 Mhz |
Rise Time | 3.5 ns |
Channel Architecture | All inputs fully insulated from each other and from ground Inputs may be activated in any combination |
Input Coupling | AC or DC, with ground level indicator |
Input Sensitivity | With 10:1 probe, 20 mV to 1000 V/div With 100:1 probe, 200 mV to 10 kV/div Direct (1:1), 2 mV to 100 V/div |
Bandwidth Limiter | 20 MHz and 10 kHz |
Polarity | Normal, inverted, variable |
Vertical Resolution | 8 bit |
Accuracy at 4 s to 10 μs/div | 5 mV/div to 100 V/div, ±(1.5% + 6 counts) 2 mV/div, ±(1.5 % + 10 counts) |
Input impedance | 1 MΩ (±1 %) // 15 pF (±2.25 pF) |
Input Voltage Range | |
Rated Maximum Floating Voltage | CAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level) |
Probe Input Voltage VPS410-II | CAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead) |
Probe Input Voltage VPS421 | CAT III 1000V / CAT IV 600V (maximum voltage between probe tip or reference lead to GND, 2000V max between probe tip and reference lead) |
Maximum BNC Input Voltage | CAT IV 300 V (maximum voltage on BNC input directly) |
Maximum Voltage On Meter Input | CAT III 1000 V / CAT IV 600 V (safety designed banana input connectors) |
Memory Save and Recall | |
Memory Locations (Internal) | 30 waveform memories plus 10 recording memories plus 9 screen copy memories |
30 Waveform Memories | Each memory can contain up to 2 or 4 waveforms plus corresponding setups |
10 Recording Memories | Each may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements |
External Data Storage | On PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port |
Screencopies | On PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port |
Volatility | Saving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status |
Real-Time Clock | Provides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings |
Case | |
Design | Rugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard Kensington lock supported to lock down instrument when left unattended |
Drip and Dust Proof | IP 51 according to IEC60529 |
Shock and Vibration | Shock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (Random), according to MIL-PRF-28800F Class 2 |
Display Size | 5.3 x 3.5″ (133 x 90 mm) LCD |
Resolution | 1120 pixels x 765 pixels |
Brightness | User-adjustable, up to 300 cd/m2 |
General Specifications | |
Temperature | Operating: battery discharging: 32 to 104°F (0 to 40°C); battery charging: 0 to 40°C (32 to 104°F) Storage: -4 to 140°F (-20 to 60°C) |
Humidity | 32 to 50°F (0 to 10°C): noncondensing 50 to 86°F (10 to 30°C): 95% (±5%) 86 to 104°F (30 to 40°C): 75% (±5%) 104 to 122°F (40 to 50°C): 45% (±5%) |
Maximum Operating Altitude | CAT IV 600 V, CAT III 1000 V: up to 6600’ (2000 m) CAT IV 300 V, CAT III 600 V, CAT II 1000 V: up to 13000’ (4000 m) |
Maximum Storage Altitude | 40,000’ (12 km) |
Interfaces | Two USB-ports provided Ports are fully insulated from instrument’s floating measurement circuitry USB-host port directly connects to external flash memory drive (up to 32 GB) for storage of waveform data, measurement results, instrument settings and screen copies Alternatively, this USB-A port may be used to connect a WiFi Adapter for wireless PC connectivity A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2. |
Probe Calibration Output | Dedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel Generator Output: 1.225 Vpp / 500 Hz square wave |
Line Power | Universal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100 VAC to 240 VAC, ±10%, 50 to 60 Hz |
Battery | Power: re-chargeable Li-Ion battery; battery swappable through easily accessible battery door at the rear of the instrument Type: BP290: 10.8V, 2500 mAh Charge indicator: battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen Operating time (with backlight low): up to 3½ using BP290 Charging time: 2½ hours using BP290; 5 hours using BP291 Power saving functions: Auto ‘power down’ with adjustable power down time; automatic ‘display off’ with adjustable power down time; on-screen battery power indicator |
Dimensions | 10.5 x 7.6 x 2.8″ (265 x 192 x 70 mm) |
Weight | 4.6 lbs (2.1 kg) |
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “Fluke 190-102-III-S ScopeMeter with FlukeView-2 software” Cancel reply
You must be logged in to post a review.
Brand
Fluke
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Related Products
GW Instek MDO 2204EX 200MHz 4 Channel Mixed Domin Oscilloscope
Rated 0 out of 5
In stock
AED 6,150 (excl.VAT)
GW Instek GDS 207 70MHz Handheld Digital Oscilloscope
Rated 0 out of 5
In stock
AED 3,565 (excl.VAT)
Rigol DS1104Z Plus digital oscilloscope 100 MHz 4 channels
Rated 5.00 out of 5
In stock
GW Instek GDS 1102B Oscilloscope
Rated 0 out of 5
In stock
Reviews
Clear filtersThere are no reviews yet.