The Megger digiPHONE+2 NTRX Set adds the Ferrolux receiver with current-direction detection, laying-depth display and GPS to the acoustic and electromagnetic cable fault pinpointing system.
The Megger digiPHONE+2 NTRX Set is the top-of-range cable fault pinpointing system, combining acoustic and electromagnetic pinpointing with the Ferrolux cable and pipe locating receiver. It gives cable fault teams one kit to trace the route and then precisely pinpoint underground cable faults after prelocation, reducing digging and downtime.
The Megger digiPHONE+2 NTRX set (order no. 1013168) is for utility and contractor crews who must confirm where a buried MV or HV cable really runs, and how deep, before they listen for the flashover. It combines the acoustic-magnetic pinpointer and the sheath-fault earth rods with a Ferrolux audio-frequency receiver, so route tracing, sheath work and fault pinpointing share one display unit instead of three separate kits.
Tracing numbers for the Ferrolux sensor, taken from the Megger digiPHONE+2 datasheet (V01d):
MME, as an authorized Megger representative in the UAE, lists related cable fault locators, cable locators and the Megger range. Without tracing, the Megger digiPHONE+2 NT set covers pinpointing and sheath faults. Megger recommends the Megger Ferrolux FLG12 or Ferrolux FLG50 generator for NTRX tracing, and the Megger Ferrolux Rx is the stand-alone receiver. Prelocate first with the Megger Teleflex SX-1 and surge with the Megger M-THUMP5.
What the Megger digiPHONE+2 NTRX puts in a single kit:
The digiPHONE+2 NTRX is used to trace cable routes, determine laying depth and current direction, and pinpoint faults on medium- and high-voltage power cables after surge pre-location. The Ferrolux receiver adds full cable and pipe locating, making the NTRX ideal for utility teams that need both fault pinpointing and route tracing in one system.
What Megger packs into the digiPHONE+2 NTRX set (order no. 1013168):
The NTRX set includes everything in the NT set plus the Ferrolux IFS receiver for tracing (it shows laying depth and current, detects current direction, and adds frequency scan and probe mode), with GPS point logging when a GPS receiver is paired. Choose the Megger digiPHONE+2 NT set if route tracing and GPS are not required.
What locating crews ask about the NTRX set:
MME (MOHAMMAD MAHDI Electronics Trading LLC), an authorized Megger representative, supports UAE utilities and cable contractors with digiPHONE+2 systems and hands-on application advice. Ask us for a quotation or a configuration check.
| Parameter | Specification |
| Method | Acoustic + electromagnetic (magnetic pulse) fault pinpointing |
| Locating receiver | Ferrolux — current-direction detection, laying-depth display, frequency scan, probe mode |
| GPS | Coordinates saved with tracing points when a Bluetooth GPS receiver is paired |
| Ground sensor | digiPHONE+2 sensor unit with 18 mm and 75 mm measuring tips, tripod, base plate and base plate with bitumen |
| Noise handling | BNR background noise reduction with automatic filtering of interference signals |
| Display | Colour display: cable compass, fault arrow, time-difference readout |
| Hearing protection | Automatic Proximity Mute; switchable 84 dB(A) acoustic limit |
| NTRX set additions | Ferrolux IFS sensor unit and connection cable (over the NT set); NT set includes ESG earth rods and Bluetooth ANC headphones |
| Control Unit – Display Unit | TFT colour display, 320 × 240 pixel |
| Control Unit – Power Supply | 6 × 1.5 V battery |
| Control Unit – Measured Value Memory | 99 measurement series with 99 measuring points |
| Control Unit – Interfaces | Bluetooth® for pairing with GPS receiver and headphones Connection socket for Ferrolux Rx sensor or digiPHONE+2 4 mm sockets for earth probes |
| Control Unit – Operating Time | > 15 hours |
| Control Unit – Protection Class | IP54 |
| Control Unit – Dimensions (H × W × D) | 65 × 225 × 100 mm |
| Control Unit – Weight | 0.9 kg (incl. batteries) |
| Ground Microphone (digiPHONE+2 type) – Gain | > 120 dB |
| Ground Microphone (digiPHONE+2 type) – Dimensions | Diameter 230 mm, height 140 mm |
| Ground Microphone (digiPHONE+2 type) – Carrying Bar Length | 450 … 750 mm (adjustable) |
| Ground Microphone (digiPHONE+2 type) – Weight | 2.2 kg (incl. telescopic handle) |
| Ground Microphone (digiPHONE+2 type) – Dynamic Range | Acoustic channel > 110 dB |
| Ground Microphone (digiPHONE+2 type) – Protection Class | IP65 |
| Earth Rods (ESG NT) – Sensitivity | 5 µV … 200 V |
| Earth Rods (ESG NT) – Noise Suppression | 50/60 Hz, 16 2/3 Hz, DC |
| Earth Rods (ESG NT) – Length | 1 m (divisible and insulated) |
| Earth Rods (ESG NT) – Weight | 0.8 kg per rod |
| Ferrolux Rx – Audio Frequency Receiver – Receiving Frequencies | 50 Hz, 60 Hz, 100 Hz, 120 Hz, 480 Hz, 491 Hz, 512 Hz, 640 Hz, 982 Hz, 1090 Hz, 1450 Hz, 8440 Hz, 9800 Hz, 9820 Hz, 32768 Hz Radio (15 kHz … 23 kHz), 32768 Hz |
| Ferrolux Rx – Audio Frequency Receiver – Dynamic Range | 120 dB |
| Ferrolux Rx – Audio Frequency Receiver – Sensitivity | 5 µA @ 1 m (33 kHz) |
| Ferrolux Rx – Audio Frequency Receiver – Maximum Depth | Line: 7 m Probe: 15 m |
| Ferrolux Rx – Audio Frequency Receiver – Depth Accuracy | Line: 5% (0.1 … 2 m) Probe: 5% (0.1 … 5 m) |
| Ferrolux Rx – Audio Frequency Receiver – Current Measurement Accuracy | 10% |
| Ferrolux Rx – Audio Frequency Receiver – Dimensions | 730 × 100 × 45 mm |
| Ferrolux Rx – Audio Frequency Receiver – Operating Temperature | -20 … +55 ºC |
| Ferrolux Rx – Audio Frequency Receiver – Storage Temperature | -30 … +70 ºC |
| Ferrolux Rx – Audio Frequency Receiver – Protection Class | IP54 |
You must be logged in to post a review.
No account yet?
Create an Account
Bench Multimeters
Reviews
Clear filtersThere are no reviews yet.