Fluke 1750/B Three-Phase Basic Power Quality Recorder
Setting up a power quality analyzer to capture detailed power quality data has never been easier than it is with the Fluke 1750. The only things you need to know are the system voltage, frequency and the power configuration (delta or wye).
The analyzer then captures the most important data for up to 30 days without losing the most important details. These power meters automatically record every power quality parameter and event, on every cycle – all the time. Once the data is captured download via Ethernet or directly to 2GB SD card (without the need of any other device).
The Fluke 1750 features a wireless front panel for viewing measurements, data, and setting up, implemented via a tablet computer using Bluetooth communication.
Fluke 1750/B Three-Phase Basic Power Quality Recorder specifications:
Power Measurements:
- Power, battery life:
Measurement type: True RMS calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
- Power factor:
Measurement range: 0.000 to 1.000
Measurement accuracy: ±1 digit from the calculation of each measured value (±3 digits for total)
- Frequency:
Measurement range:42.5 to 69 Hz
Measurement source:Same as PLL synchronization source
Measurement accuracy:±10 mHz (10 to 110% of range, with sine wave)
- Displacement power factor:
Measurement method: Calculated from the phase difference between voltage fundamental and current fundamental
Measurement range:- 1.000 (leading) to + 1.000 (lagging)
Measurement accuracy:±0.5% reading ±2% full scale ±1 digit
Anna –
This unit is very good for intended use.