MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
Call for price
The Megger FRAX101 is an ultra-portable Sweep Frequency Response Analyzer (SFRA) for power transformers, weighing just 1.95 kg with a 0.1 Hz to 25 MHz range and optional battery.
Call for price
The Megger MFT1731 is a fully featured multifunction installation tester adding Type B RCD, phase-to-phase loop, earth-electrode (including stakeless) testing, memory and Bluetooth download to the MFT1700 platform.
Call for price
The Megger DLRO10 is a rugged 10 A digital low resistance ohmmeter (DUCTER) measuring 0.1 µΩ to 2000 Ω with ±0.2% accuracy and forward/reverse averaging.
Call for price
The Megger ADX-12 is an automated static motor analyser that combines surge testing to 12 kV with DC insulation resistance, PI/DAR, DC HiPot and optional RLC and partial-discharge tests in one instrument, for complete condition assessment of motor and generator windings from a 10.4-inch touchscreen.
Call for price
The Megger ADX-6 is a 6 kV automated static motor analyser that combines surge, DC HiPot, insulation resistance and low-voltage RLC testing in one portable, PowerDB-connected instrument with a 10.4-inch touchscreen for complete motor and coil diagnostics.
Call for price
The Megger ADX-4 is an automated static motor analyser that combines surge testing to 4 kV with DC insulation resistance, PI/DAR, DC HiPot and optional RLC and partial-discharge tests in one instrument, for complete condition assessment of motor and generator windings from a 10.4-inch touchscreen.
Call for price
The Megger TOS1 is a high-accuracy four-terminal resistance standard for calibrating and verifying transformer ohmmeters and winding-resistance testers, usable both as a laboratory calibration reference and as a portable field check standard.
Call for price
The Megger FREJA549 is a lightweight, portable relay test system with up to 9 current channels for testing differential and overcurrent protection relays, with touchscreen and PC control.
Call for price
The Megger TTRU1 is a rugged handheld transformer turns ratiometer with a colour display, measuring turns ratios up to 50,000 with 0.05% accuracy plus phase, polarity, excitation current and Go/No-Go winding checks, available in Basic (37.5 V) and Advanced (62.5 V) versions.
Call for price
Shop Megger BM5200 at competitive prices in Dubai, UAE. Upgrade your electrical testing tools effortlessly.
Call for price
The Megger ESG NT2 is a cable sheath / ground fault locator that uses the step-voltage method with two earth rods, automatic calibration and noise suppression, on a sun-readable TFT display.
Call for price
The Megger MTO250 is a high-current, dual-channel transformer ohmmeter delivering up to 50 A test current for fast, accurate winding resistance measurement on large power transformers. Two simultaneous channels and ±0.1% accuracy make it ideal for winding tests, tap-changer checks and heat-run testing.
Call for price
The Megger MTO106 is a compact, dual-channel transformer ohmmeter for measuring the winding resistance of small transmission and distribution transformers. With up to 6 A test current, two simultaneous channels and ±0.25% accuracy, it delivers fast, stable readings from 10 µΩ to 30 kΩ.
Call for price
The Megger MTO210 is a dual-channel transformer ohmmeter delivering up to 10 A test current for fast, accurate winding resistance measurement on single- and three-phase power transformers. Two simultaneous channels and ±0.25% accuracy make it ideal for verifying factory readings and checking on-load tap changers.
Call for price
The Megger STVI-10 is a handheld Smart Touch View Interface controller for SMRT relay test systems (SMRT33/43/46/410), SPI225 and MRCT. Its bright 10.1-inch multi-touch screen and RTMS software let engineers run manual and automated relay tests directly at the test set without a PC.
Call for price
The Megger Baker DX is a static motor analyser available in 4–15 kV models, combining surge, DC HiPot, insulation resistance, PI/DA, step-voltage and RIC testing with an 8-inch colour touchscreen for complete off-line motor and coil diagnostics.
Call for price
The Megger LTC135 is a DC constant-current power supply that extends a circuit breaker analyser to test on-load tap changers, delivering 0.1, 1 or 5 A for dynamic resistance and timing measurements on transformer OLTCs.
Call for price
The Megger EGIL200 is a mid-range circuit breaker analyser for fast, straightforward timing and motion testing of HV and MV breakers, compliant with IEEE C37 and IEC 62271.
Call for price
The Megger Ferrolux Rx is an audio-frequency receiver for precise route tracing and fault location of underground cables and pipes, using SuperMax and SignalSelect functions and a plan-view display when paired with a Ferrolux FLG signal generator.
Call for price
- Safe identification of de-energized primary cables
- DC pulse method up to 100 A to avoid false positives
- Operates >50 hours on internal AA batteries
- Identifies live secondary cables up to 240 V AC
- IP 54 protection class for durable field use
- Includes flexible AZF 250-CI identification clamp
Call for price
The Megger TDAcompact is a portable capacitance and tan delta (loss factor) analyzer for insulation diagnostics of rotating machines and cables. Measuring tan δ to 10⁻⁴ resolution over 20–500 Hz with fiber-optic precision shunts, it assesses epoxy-mica, oil-paper and mass-impregnated insulation systems.
Call for price
The Megger FOS4 is a battery-powered fibre-optic transmission system that digitises and transmits partial discharge (PD) sensor signals to the FOR4D receiver with full galvanic isolation.
Call for price
The Megger HVcompact is a precise digital high voltage meter with an adjustable divider ratio, breakdown detection and non-volatile voltage history, in needle-meter and oscilloscope display modes.
Call for price
The Megger FREJA 546 is a versatile, portable relay test system for secondary testing of protection relays, with touchscreen and PC control and manual, steady-state and dynamic testing.
Call for price
The Megger EST 35 (Ord. 81 0300) is a high voltage discharge rod rated to 35 kV, with a resistive grading system and fibreglass shaft to safely dissipate capacitive charge after de-energization.
Call for Price
The Megger MIT525 is a 5 kV diagnostic insulation resistance tester measuring up to 10 TΩ, adding result storage and download to IR, DAR, PI, DD, SV and ramp tests, in a rugged CAT IV 600 V, IP65 case.
Call for price
The Megger PD Scan is a lightweight handheld partial discharge scanner for early detection of PD in medium- and high-voltage equipment. It combines TEV, airborne ultrasonic and HFCT measurement in one instrument with a touchscreen, camera and QR scanner for fast, documented surveys of switchgear and cables.
Call for price
The Megger 569001 is a portable ultrasonic leak and corona detector that picks up airborne ultrasound from pressurised gas leaks and electrical corona or arcing and converts it to audible sound, locating a 0.05 mm leak at 1.5 m and pinpointing corona on HV equipment.
Call for price
The Megger Phazer is a three-phase watt-hour meter test and calibration system. It generates precise, independent voltages (0–600 V) and currents (to 120 A) at programmable phase angles to test and calibrate electricity meters to ±0.05% accuracy, meeting ANSI C12.1 performance requirements.
Call for price
The Megger PA2505K is a portable phantom load that provides a controlled source of current and voltage for testing watt-hour (energy) meters by the comparison method. With full-load ranges up to 50 A, selectable power factor and continuous adjustment, it suits single- and polyphase meter testing in field or lab.
Call for price
The Megger 550005B is a rugged single-phase, hand-cranked transformer turns ratio (TTR) test set that needs no external power, using a precision null-balance bridge and four decade dials to measure turns ratio to 0.1% accuracy along with exciting current on power and distribution transformers.
Call for Price
The Megger TTR25-1 is a lightweight handheld single- and three-phase transformer turns ratio tester with simple one-button operation, measuring turns ratios up to 20,000:1 accurately along with excitation current and polarity, running from standard AA batteries.
Call for price
The Megger TTR20-1 is a lightweight handheld single- and three-phase transformer turns ratio tester with simple one-button operation, measuring turns ratio to 10,000 with 0.2% accuracy plus excitation current and polarity, running from standard AA batteries.
Call for Price
The Megger TTR100-1 is a lightweight hand-held transformer turns ratio tester for single- and three-phase transformers, CTs and PTs, measuring turns ratio to 20,000 with 0.2% accuracy plus phase displacement, excitation current and polarity from a rechargeable battery.
Call for price
The Megger TRS1 is a high-accuracy reference ratio standard for calibrating and verifying transformer turns-ratio (TTR) test sets, providing precise ratios from 1:1 to 2048:1 with 0.01% accuracy for both laboratory and field use.
Call for Price
The Megger MWA300 and MWA330A combine three-phase turns-ratio (TTR) and winding-resistance testing in a single instrument. With built-in demagnetisation, OLTC continuity, magnetic-balance and excitation testing, they cut transformer test time dramatically. The MWA330A adds a built-in 12-inch touchscreen computer.
Bench Multimeters