Fluke Calibration E-DWT Electronic Deadweight Tester

Fluke Calibration E-DWT Electronic Deadweight Tester

E-DWT-H breaks new ground, improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical, piston-cylinder, and weight-based deadweight testers. It’s a lighter, easier-to-use deadweight tester alternative that is at home in the lab or instrument shop, as well as in the field performing in-situ calibrations and tests.

This complete hydraulic pressure calibration system combines the convenience and precision of continuous, real-time electronic pressure measurement with the simple and direct operation of high-quality operator-controlled pressure generation hardware. E-DWT-H one-year measurement uncertainty is ±0.02% of reading with ranges up to 30,000 psi.

It can be configured to provide this uncertainty from its full scale down to 1% of its range. Built-in pressure generation and control hardware allow the operator to fill and prime the system under test and generate and precisely adjust pressure throughout the range with ease.

Fluke Calibration E-DWT Electronic Deadweight Tester Specifications

• Power requirements :  To RPM4-E-DWT: 12 V DC 1.2 A
• To AC to DC power supply: 100 V AC to 240 V AC, 50/60 Hz
• Temperature range : Storage: – 20°C to 70°C , Operating: 10°C to 40°C
• Relative humidity : Storage: 0% to 100%, Operating: 0% to 70%
• Weight: 1 Q-RPT: 12 kg (26 lb) approximate, 2 Q-RPT: 14 kg (30 lb) approximate
• Dimensions : E-DWT footprint (W x D): 41.4 x 37.1 cm (16.3 x 14.6 in)
• E-DWT height: 26.9 cm (10.6 in), 33.6 cm (13.2 in) to max variable volume handle height
• Pressure ranges are dependent on Q-RPT(s) included in RPM4-E-DWT.
• 200 MPa (30,000 psi) maximum with standard variable volume
• 100 MPa (15,000 psi) maximum with high volume (-HV) variable volume
• Operating medium: Delivered filled with oil (di-ethyl-hexyl sebacate) or dry
• Standard E-DWT-H is compatible with Sebacate, silicon oils, propylene glycol, fully fluorinated liquids, partially fluorinated liquids, isopropyl alcohol, and distilled water. Option for Skydrol or mineral oil preparation.
• Reservoir capacity: 300 cc (18 in³)
• Pressure limits :
• Maximum working pressure: Range of RPM4-E-DWT monitor’s Hi Q-RPT 200 MPa (30,000 psi) with standard variable volume 
• 100 MPa (15,000 psi) with high volume variable volume
• Maximum priming pump pressure: 700 kPa (100 psi)
• With Lo Q-RPT selected: Range of RPM4-E-DWT monitor’s Lo Q-RPT

• Communication ports : RS232 (COM1, COM2)