Fluke Calibration P3200 Hydraulic Deadweight Tester

Fluke Calibration P3200 Hydraulic Deadweight Tester

The Fluke Calibration P3200 models are available in single or dual-piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick, and easy to use. Units feature a built-in priming pump for large-volume applications, piston flotation indicators, and a high-quality screw press for fine pressure control.

The Fluke Calibration  P3200 Hydraulic Weigher consists of a piston and cylinder assembly that is actuated by weight. Weight is added to the piston to create a known pressure. Pressure is determined by the weight of the piston and the area of ​​the piston, known as the force area. Force zones are calibrated to provide accurate pressure readings.

The Fluke Calibration  P3200  is easy to use and features a compact, portable design that makes it easy to transport and use in the field. It also has a self-contained hydraulic system that eliminates the need for a pump or external pressure source.

FAQ

Q: What is the maximum pressure that the P10,000 can measure?

A: The P3200 can measure pressures up to 10,000 psi (700 bar).

Q: What is the accuracy of the P10,000?

A: The P10,000 has an accuracy of 0.015% in reading.

Fluke Calibration-P3200 Hydraulic Deadweight Tester key features:

• Pressure ranges to 10,000 psi (700 bar)
• 0.015% of reading accuracy standard (0.008% optional)
• Single or dual-piston formats
• Built-in hand pumps standard
• Mounted spirit level with adjustable feet
• Units can be trimmed to local gravity FOC

Fluke P3200 Hydraulic Deadweight Tester specifications:

• Materials of Construction

• Standard weight material: Series 3 non-magnetic austenitic stainless steel
• Weight density: 7.8 g/cm³
• Optional fractional weights: Solution heat-treated aluminum
• Weight density: 2.7 g/cm³
• Piston material: Tungsten carbide with nickel binder
  Density- 15.0 g/cm³
• Cylinder material: Hardened martensitic steel
  Tungsten carbide (water above 500 psi, 35 bar)
• Thermal coefficients of expansion: Oil piston/cylinder 16.5 ppm/°C
  Water (above 500 psi, 35 bar) 11 ppm/°C

• General

• Test port adaptors : 1/8, 1/4, 3/8 and 1/2 NPT or BSP
• Instrument weight: 36 lbs (16 kg)
• Instrument size (W x D x H) : 17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
• Mass set weight (typical): 80 lbs (36 kg)
• Reservoir volume: 150 cc
• Screw press displacement: 5.5 cc
• Pump displacement: 4.7 cc per stroke
• O-ring seal materials: Buna N as standard, Viton and EPDM available
• You can see the other  specifications about this device in dead weight tester calibration procedure pdf

 Related Products

• Fluke Pressure Calibrator 718-100G
• Fluke Gauge Calibrator 700G
• Fluke pressure calibration hand pump